0%

0%

vifragu

introvertido,aficionado al montaje,informatico,curioso

España

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 05/21/2019.

Projects I Like & Follow

Hackaday Prize 2019

A low-cost, high-performance bipedal walking robot

Blackbird Bipedal Robot

The 2018 Hackaday Prize

A 75 watt MPPT Solar Charger with tons of features. Efficiency > 97%, USB interface, data logging, 2 USB charging ports and much more...

High Efficiency MPPT Solar Charger

lukas-fssler Lukas Fässler

An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone

Smartphone Connected Home Door Lock

hacker-house Hacker House

Step-by-step instruction to run Wine on Raspberry Pi (or other ARM) using ExaGear Desktop

Run Wine on Raspberry Pi

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

Use a small camera equiped vehicle to explore tight but vast spaces. Remotely control by wifi.

Remote wifi video car

A mixed reality shooting gallery using virtual reality tracking hardware.

Mixed Reality Room Scale Shooting Gallery

richard-hogben Richard Hogben

Hardware Hacking of Accu-Chek Performa Insight

Hardware Hacking of Accu-Chek Performa Insight

EthicalHacker523

The 2017 Hackaday Prize

A haptic vest for orientation for the blind

HaptiVision

janthar JanThar

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

A 140MHz - 3GHz 2-port T/R VNA and software

Low cost open hardware VNA

A MicroPython gaming system featuring a Wemos D1 mini, OLED display, joystick, buttons, fancy LEDs and a buzzer.

GamerGorl

brian-wagner Brian Wagner

The 2018 Hackaday Prize

ROS mobile robot base for everyone

ros-omni-base

panovvv panovvv

An analog clock that displays the time using WS2812 LEDs instead of physical hands.

RGB LED Analog Clock

jackw01 jackw01

A workshop on IOT including a simple IOT device using Wemos D1, a DS18B20 temperature sensor, a battery shield and a rechargeable battery.

Simple IOT

radu-motisan Radu Motisan

ESP8266 captures high scores as they occur on a Galaga PCB from the Golden Age of Arcade

Galaga meets IoT

justinrichards justin.richards

For "Repairs You Can Print Contest", and for the sake of documenting the repairs and improvements, done by 3D printing.

3D Printed Repairs

christian-lerche Christian Lerche

I'm on vacation, not bored

a "true" in system programmer

View all

Bits