0%

0%

VVVWIN

VVVWIN – Nhà cái cá cược trực tuyến uy tín từ 2010, được cấp phép bởi PAGCOR và Isle of Man,

Hồ Chí Minh, Việt Nam

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/04/2025.

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.

OpenExposer

mario-lukas Mario Lukas

A computer running the BASIC programming language, generating composite video and reading PS/2 keyboard input using a single AVR.

Single Chip AVR BASIC Computer

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

How to power up and communicate with the cheap RCWL-0516 radar sensor module

First steps with the RCWL 0516 radar switch

A 3D printer for printing with welding wire

Wire 3D Printer

dominik-meffert Dominik Meffert

Open-source IoT platform

mqopen

ivo-slanina Ivo Slanina

A DIY smart home system the SCADA way...

DIY Home Automation

stefanschnitzer stefan.schnitzer

Official Hackaday Prize Entry

We've connected our entire apartment, DIY style.

Practical Home Automation

fabricateio Fabricate.IO

Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost

Commercial home automation

ian-norton Ian Norton

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

kristjan-berce Kristjan Berce

The 2015 Hackaday Prize

PICkit can be used as a PIC Programmer, Serial to USB converter, Logic Probe, Logic Analyzer, but also as an AVR Programmer for Atmel MCUs

Microchip's PICkit 2 as an Atmel STK500 programmer

Built from the microcontroller up using rs485 and 2 km of CAT6.

My fully custom home automation system

bernard-kerckenaere Bernard Kerckenaere

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

I finally received my Raspberry Pi Zero, just in time to get into the DIY challenge of building a smart drone with the Pi Zero and APM unde

MINI-Zee: a $100 DIY smart drone with the Pi Zero

patrickpoirier51

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

View all

Bits