Close
0%
0%

Nick Novak

just a hobbyist that likes robots.

Following
Send a private message
Similar accounts worth following
1 Followers
1 Following
0 Projects
0 Likes
nick-novak
Send a private message

This user joined on 12/26/2019.

76.7k
2.3k
13
564
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
Project Owner Contributor

Atlas - 6DOF 3D printed universal robot

damian-lickindorfDamian Lickindorf

61.8k
8k
33
289
An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.
Project Owner Contributor

OpenExposer

mario-lukasMario Lukas

20.7k
3.6k
24
240
Blackbox shifts 3D printing towards a multitool manufacturing robot.
Project Owner Contributor

Multitool 3D Printer - Blackbox

marc-schmannMarc Schömann

16.3k
205
10
126
Yet Another Robot aRM - where I develop a low-cost compliant robot arm with a 1meter reach, 1KG payload.
Project Owner Contributor

YARRM - 7-DOF Low-Cost Robot Arm

jonathan-lussierJonathan Lussier

13.5k
4.4k
4
58
Get high-resolution 3D printing by building your own.
Project Owner Contributor

Laser SLA 3D printer with galvo

mark-pengMark Peng

13.3k
3.6k
6
88
A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance
Project Owner Contributor

3D Printed Robot Joint with Active Compliance

tim-wilkinsonTim Wilkinson

11.1k
6.8k
8
61
Robotic Exoskeleton for Grip Enhancement and Stroke Rehabilitation
Project Owner Contributor

BEOWULF

chad-paikChad Paik

9.6k
121
13
70
3D simulation and control software for robots
Project Owner Contributor

Robot Overlord 3

dan-royerDan Royer

7.9k
121
7
114
Cycloidal 3D printable Hollow Saft 1:11 reducer with an integrated Encoder and an adjustable belt stage.
Project Owner Contributor

OpenCyRe

damian-lickindorfDamian Lickindorf

6.3k
5.4k
6
36
Aluminum 3D printer made of Actobotics components.
Project Owner Contributor

18" x 15" Aluminum 3D Printer

eviscerate-coreEviscerate Core

6.2k
628
4
59
A small inverter intended as a platform for learning brushless motor control techniques
Project Owner Contributor

Brushless DC Motor Controller

osannolikosannolik

5.4k
52
0
46
This is my robot arm, with recycled materials, can pick 2 Kg and costs around 100$
Project Owner Contributor

D.I.M.E.R PROJECT 6 DOF Robot Arm

antonio-regueiraAntonio Regueira

4.2k
3.4k
0
10
Thermostat touch for home user with wifi and web control based on Raspberry pi
Project Owner Contributor

Raspberry Thermostat

jpnosjpnos

3.3k
27
2
18
Building an SLM 3d printer With Multi Material
Project Owner Contributor

Open SLM

patrick-ryanPatrick Ryan

2.8k
2.8k
3
2
Don't want to hard code your Blynk AuthID or WiFi credentials into your code? Then use Embedis to store and change them on-the-fly!
Project Owner Contributor

Blynk using Embedis for Settings

pattern-agentsPattern Agents

2.4k
53
0
58
An open design robotic arm, made with dc motors, 5 degrees of freedom, can pick up 5 Kg at 1.50 m and with the lowest cost posible
Project Owner Contributor

DIMER MKII, Large open robotic arm

antonio-regueiraAntonio Regueira

1.5k
1.5k
0
52
The project focuses on an open source design of a gripper with tactile sensor system for robotic hands and exoskeletons
Project Owner Contributor

Open source Tactile sensor enabled robotic gripper

aman-gargAman Garg

1.4k
19
0
12
Affordable high performance brushless torque sensing arm made with consumer parts, desktop CNC milling, and laser cut tubes
Project Owner Contributor

Prometheus Arm

josh-geatingJosh Geating

View all

Share this profile

Share

Bits

Send a private message to Nick Novak

Become cool instantly

Create your Hackaday.io profile like Nick Novak and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Nick Novak", please tell us the reason.