Close
0%
0%

Yehat

Tinkerer. Life hacker.

Bulgaria
Following
Send a private message
Similar accounts worth following
1 Followers
27 Following
0 Projects
0 Likes
yehat
Send a private message

This user joined on 11/20/2020.

38.4k
3.4k
31
82
A last gasp Uninterruptible Power Supply for any Raspberry Pi computer.
Project Owner Contributor

Single SuperCapacitor UPS for Raspberry Pi

bud-bennettBud Bennett

26.5k
102
5
81
A solar-powered ESP8266 based Weather Station, which can run years without taking power from an external source
Project Owner Contributor

Solar Powered WiFi Weather Station V2.0

open-green-energyOpen Green Energy

20.8k
204
62
162
Modified Chroma74 shelf label to be my weather station display. It is 7.4" 3-Color E-Ink units that cost $12 on eBay.
Project Owner Contributor

7.4" E-Ink Shelf Label used as a Weather Station

yodalogicYodaLogic

16.9k
2.3k
0
27
An LED desk clock driven by NTP on a Pi Zero W
Project Owner Contributor

Raspberry Pi Zero W desk clock

nick-sayerNick Sayer

13.6k
2.8k
17
51
LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.
Project Owner Contributor

LP3D: A fully lasercut kit 3D printer

luke-wallaceLuke Wallace

10.5k
3.1k
1
11
Setup MetaTrader on your ARM device and an automated trading robot for Forex
Project Owner Contributor

MetaTrader 4 on Raspberry Pi or any other ARM

dmitryDmitry

9.9k
3.4k
22
134
RGB LEDs Triangular/Hexagonal Pixels Matrix.
Project Owner Contributor

RGB HexMatrix | IOT Clock

mukesh-sankhlaMukesh Sankhla

9.6k
987
0
20
Use a Raspberry Pi to build an EV charging station
Project Owner Contributor

Raspberry Pi EVSE Hat

nick-sayerNick Sayer

8k
6.5k
3
41
This will emulate the AVR code right out of the .ELF file
Project Owner Contributor

Arduino ATmega 328 Emulator

tehaxor69tehaxor69

6k
4.1k
12
21
Matching the performance of an overmolded strain relief using 3D printing and flexible filaments
Project Owner Contributor

3D Printed "Molded" Strain Relief

alex-richAlex Rich

3k
596
4
66
A connected control system for all agriculture applications based on RS485 control nodes and multiple wireless sensor networks
Project Owner Contributor

Agricoltura - IO

avrAVR

2.8k
2.1k
2
46
Solar charges, Open build, affordable, watch and report or community presence robot.
Project Owner Contributor

Watchdog Security Camera Robot

josh-starnesJosh Starnes

2.7k
2.7k
3
10
ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.
Project Owner Contributor

IOT ModbusBox

luisgculuisgcu

2.4k
2k
1
18
A MicroPython gaming system featuring a Wemos D1 mini, OLED display, joystick, buttons, fancy LEDs and a buzzer.
Project Owner Contributor

GamerGorl

brian-wagnerBrian Wagner

2.3k
2.3k
0
7
A project for my grandchildren to first build line-following robots then convert them to being controlled by their phones and tablets.
Project Owner Contributor

IP control for inexpensive line following robots

jedjed

1.7k
1.7k
8
34
A clock with 5 hands to show Time and Date
Project Owner Contributor

CalendarClock

michael-mllerMichael Möller

1k
1k
4
16
A perimeter security system employing multiple sensors to detect area intrusions and AWS for alarm notification, logging and visualization.
Project Owner Contributor

PERISCOPE Perimeter Security

kschulzkschulz

865
850
1
6
H.E.R.O. (Hazardous Environment RecOnnaissance) Sensor
Project Owner Contributor

HERO Sensor

will-lynt-iiiWill Lynt III

View all

Share this profile

Share

Bits

Send a private message to Yehat

Become cool instantly

Create your Hackaday.io profile like Yehat and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Yehat", please tell us the reason.