Instructions | Halloween Raven with sound and thunder effect

1

The main schematic view

A small Fritzing draw for the schematic.
2

Drill a hole for the wires to get out from the torso
3

Use hard wire to get throu the wires form the eyes to back
4

A small wodden box is will enough to keep the whole stuff inside and also put the bird on it. You should to cover it later

The whole stuff fins inside.
5

Cut down about 25cm long plastic tube.

This will be the mouthpiece for the PC speaker. The spaker only 0.25W but if you put on a long plastic tube the voice will be enough louder.
6

Use gluegun for the gluing into the box. Also fixing the modlues with small screws if it's neccessary.

I know it's not so nice how it looks. But the end will be so nice.
7

Wire up the whole sketch.

Pay attention when you copy the sound files for the microSD card copy in filename order. If you do not follow this the playing filenames will be played randomly.
8

Close the box, and start to Decorate. I think mine to too decorated. Not neccessary to look like this.

It's your imagination that is the limit.

Halloween Raven with sound and thunder effect