Quantity | Component name | |
1 | × | Smart Plant board This is the designed board that host all the circuits and the components that bring the Smart Plant project alive |
1 | × | 2.9" e-paper display The recommend (and tested working) display is the `296x128, 2.9inch E-Ink raw display panel (https://www.waveshare.com/product/2.9inch-e-paper.htm) that you can order directly on the manufacturer. |
1 | × | 1000mAh LiPo battery The ideal dimensions shouldn't excess the 50x34x5mm in order to fit in the designed enclosure. |
1 | × | 3D Printed enclosure The one I designed, despite not being fully waterproof, does a good job protecting the electronics agains eventual spilled drops of water while watering the pot |
1 | × | Solar panel In addition to the USB-C, and with the aim of extending the service time between (USB) charges of the battery, the Smart Plant can be powered from a solar panel. |