Close

Load cell direct ADC

A project log for EMDrive/satellite

Developing a small fuelless microwave thruster

paul-kocylaPaul Kocyla 08/23/2015 at 05:250 Comments

Load cell connected directly to the ADC. There´s NO EMdrive on it now, it´s just the load cell test.

The graph is an over-night recording (every 2 seconds). The yellow graph shows a moving average with a window of 512 values. There is a continuous drop (80mg), I assume due to temperature change over night.

This should come into the milligram range now, but there´s still room for improvement.

Discussions