0%

0%

georg ottinger

I am sociologist and embedded designer - involved in a network of OpenSpaces called Open Technologie Labratories

Vöcklabruck, Austria

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/30/2014.

My Projects

The 2016 Hackaday Prize

A small, simple, low-cost, versatile PCB that can be used to make filters, attenuators, amps, dummy-loads the DIY-way

RF Biscuit

Official Hackaday Prize Entry

This project aims to create a production-ready, emc-compliant OpenHardware AudioStreaming-Product using OpenSource-Tools whenever possible.

OggStreamer / LiveRadio Streaming

The 2016 Hackaday Prize

8Bit / ~2MHz bandwidth SDR-TX with RPI

ΣΔπ - TX

Things I've Built

Odurino-Board

This is a Arduino spinoff - it combines two designs: the Arduino Single-Sided Serial Board and the Metaboard - and aims to be easy to solder to be used in Workshops. http://www.otelo.or.at/fileadmin/content/Adrurino/odruino_v1.0.zip

Projects I Like & Follow

Official Hackaday Prize Entry

Python-powered machine vision modules

OpenMV

Official Hackaday Prize Entry

A basic radar system makes radar accessible at low cost for experiments with rangefinding & navigation of autonomous aircraft or spacecraft.

Simple, low-cost FMCW radar

A computer running the BASIC programming language, generating composite video and reading PS/2 keyboard input using a single AVR.

Single Chip AVR BASIC Computer

Official Hackaday Prize Entry

BLDC shield for arduino and stand alone controller

OpenBLDC

Official Hackaday Prize Entry

OneCharger to rule them all; solar-panel, TEG, dynamo...

1Charger

Official Hackaday Prize Entry

100% open-source (hardware & software) development/hacker cartridge for the Sega MegaDrive (sold as "Genesis" in the USA)

USB MegaDrive DevKit

Official Hackaday Prize Entry

A device consisting of a Toshiba TCD1304AP CCD sensor, a Wolfson WM8253 Video ADC, a Parallax Propeller, and an FTDI FT232H USB IC

open-Spectrometer

A vintage Z80 computer prototype, compatible with CP/M & Sinclair ZX Spectrum Operating Systems

"XOR Hobby", a Vintage Z80 Computer Prototype

Official Hackaday Prize Entry

over the last few years, i've build up a functional laser interferometer. now i want to use it to accurately measure distance.

repurposed luminiferous aether detector

Official Hackaday Prize Entry

... Keeping his inside conditions to take care of plants.

Smart Small Greenhouse

Watson is a relatively simple RF power meter based on the "120 dB Measurement System" outlined in the Analog Devices (AD) AD8307 data sheet.

Watson - 120dB RF Measurement System

Official Hackaday Prize Entry

Fly paper! (formally called papyrus) A Quadcopter frame make out of paper for less than .20 cents Weight 61 grams!

The world's first paper quadcopter

Need a low-accuracy, high-noise, obscene-current benchtop supply? Build this with junk from your basement!

ATX Benchtop Power Supply

An A500 build into a big tower case, with new backside, ATX power supply and keyboard in a new case.

Commodore A500 tower

Official Hackaday Prize Entry

Accessibility robot, bringing confidence and safety to those who have difficulties cutting food

Automatic Food Slicer Robot

I wanted to try OSH Park, so I designed a simple breakout board for the AD849x thermocouple amplifier ICs.

AD849x breakout board

Simple B&W HUD.

Making a HUD using old VHS camcorder's View Finder

Official Hackaday Prize Entry

Keeping and eye on my crazy chickens

What the Chook?

View all

Bits

Michael O'Brien wrote 07/04/2014 at 19:08

Thanks again for the skull :)

Are you sure? yes | no

georg ottinger wrote 07/04/2014 at 19:34

well deserved - you're welcome

Are you sure? yes | no