Close
0%
0%

Teemo

Following
Send a private message
Similar accounts worth following
2 Followers
12 Following
1 Projects
18 Likes
teemo
Send a private message

This user joined on 01/02/2018.

3.2k
20
6
18
Just want to share the experience of building pick and place machine.
Project Owner Contributor

Details of pick and place machine build.

teemoTeemo

161.6k
787
62
502
Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.
Project Owner Contributor

DIY Pick and Place

anthonywebbanthony.webb

31.1k
331
26
201
Advanced Pick and Place machine
Project Owner Contributor

brdMaker

mika-heikkinenMika Heikkinen

24.4k
446
42
147
Strain wave or harmonic drive gears are cool. As a cheap analog for metal or flex filament splined cup, try using timing belts.
Project Owner Contributor

Strain Wave Gear with Timing Belts

simon-merrettSimon Merrett

22.2k
6k
9
104
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp
Project Owner Contributor

Pick and place machine - Smoothieboard/OpenPnp

johnJohn

16.4k
128
9
112
Open source, mostly 3D printable, lightweight pick and place head for a standard groove mount
Project Owner Contributor

Arcus-3D-P1 - Pick and Place for 3D printers

daren-schwenkeDaren Schwenke

12.2k
901
3
30
Cheap DC powered LED Grow Light design, using off the shelf components and hardware store building supplies
Project Owner Contributor

Simple DC LED Grow Light

avrAVR

4.8k
38
0
24
A custom-built pick-and-place machine running OpenPnP.
Project Owner Contributor

Pick-and-Place Machine

lanceLance

4.3k
1.4k
1
17
Building a Pick and Place machine on the cheap, in a repeatable way.
Project Owner Contributor

Thrifty Pick and Place

alastair-youngAlastair Young

2.4k
46
4
27
The goal: to make a Pick and Place machine that is small on cost but big on ability
Project Owner Contributor

ProtoPnP

alexAlex

2.4k
948
1
8
A study for a simple pick-and-place head using a servo and an injection needle instead of a hollow-shaft stepper motor and a standard nozzle
Project Owner Contributor

simple pick-and-place head

michael-mayerMichael Mayer

2.3k
44
0
38
Pick and place head providing part rotation and top/bottom machine vision in a package lighter than an E3D V6.
Project Owner Contributor

P2 - Pick and Place for 3D Printers

daren-schwenkeDaren Schwenke

2.2k
2.2k
1
8
Produce a working Wozniak design blue box
Project Owner Contributor

WoZ Bluebox hardware recreation

cprossucprossu

1.5k
1.5k
0
3
IR Receiver or Demodulator module made using photo-transistor BPW 77NB and standard NPN amplifier transistor PN2222A working on Arduino Due
Project Owner Contributor

Custom IR Remote demodulator for Arduino Due

electromaniaElectromania

1.1k
1.6k
0
3
This is a lowcost rf module designed to link sensors etc to a home automation setup..
Project Owner Contributor

Yet another Home Automation Wireless Doodad!

frazzledbadgerFrazzledBadger

1k
5
2
6
Modular Pick and Place drag feeder you build to suit, on a Lego sheet.
Project Owner Contributor

P1 - Lego compatible drag feeder

daren-schwenkeDaren Schwenke

550
1.8k
0
2
Hardware end of machine vision capture system
Project Owner Contributor

Chute Cam

clandestignCLANDESTIGN

467
766
0
5
The purpose of this project was to create a device that would be an improvement on the ignition interlock device.
Project Owner Contributor

The Road to Zero Tolerance

joy-shahJoy Shah

394
2.5k
0
1
Control RGB LED or RGB LED Strips with Android using Bluetooth
Project Owner Contributor

Cyclistic

julian-labuschagneJulian Labuschagne

View all

Share this profile

Share

Bits

Send a private message to Teemo

Become cool instantly

Create your Hackaday.io profile like Teemo and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Teemo", please tell us the reason.