0%

0%

aeropic

engineer and somewhat hacker :-)

france

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 11/28/2021.

My Projects

An equatorial table shall be adapted to the telescope you intend to use (size and mass) and to your location (latitude of observations).

3D printed equatorial table fully parametric

aeropic aeropic

a very cheap and easy to build fully wireless DSC... based upon ESP32 and AS5600 Hall effect rotation sensor

$10 wireless telescope pushto DSC

aeropic aeropic

Things I've Built

B0B

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Supplyframe DesignLab: 2022 Hackada…

portable flexible panel + MPPT controller + solar tracker system less than 55 USD ????

Low cost solar panel solution (MPPT + sun tracker)

jp-gleyzes JP Gleyzes

The 2015 Hackaday Prize

Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedorn Martin Vincent Bloedorn

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

The 2016 Hackaday Prize

An overhaul of the iconic Power Glove to allow it to control robots, drones or anything your heart desires. It's so... good.

Power Glove Universal HID

nolan-moore Nolan Moore

Creating copies of keys using a 3d printer and OpenSCAD

3d Printing real-world keys

dave-pedu Dave Pedu

Supplyframe DesignLab: 2023 Hackada…

Teensy/Arduino Flight Controller and Stabilization

dRehmFlight VTOL

nick-rehm Nick Rehm

Track and Trace anything with the Arduino AnyTracer of only 25 x 25 mm! It is the smallest, complete GPS GSM tracker in the entire world.

Arduino AnyTracer

addydej addydej

How I added a 500W heater to my 3D printer to enable reliable ABS printing.

Enclosure Heater for 3D Printer

mark-rehorst Mark Rehorst

The 2016 Hackaday Prize

Eliminate belts, pulleys, leadscrews.

linear stepper motor 3d printer

A switch for a Dahlander dual speed asynchronous 3-phase motor based on a finite state machine implemented on Arduino

Arduino-based Dahlander switch

jean-noelsimonnet jean-noel.simonnet

The 2017 Hackaday Prize

Neopixel watch with accelerometer.

Arduino Neopixel Watch

marcello-graves Marcello Graves

Control just about anything RC

Arduino LoRa RC transmitter and receiver

Build log of a 450mm quadcopter AKA drone frame.

Hiro 450mm Quadcopter Build

richard-hogben Richard Hogben

2021 Hackaday Prize

Clickety-clackety goodness to display a decimal number

Mechanical 7-Segment Display

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

harry-gao Harry Gao

Supplyframe DesignLab: 2023 Hackada…

Rezodo aims at building a distributed irrigation system and a weather station with farmers. It's also a fully open platform for IoT learning

Rezodo: Long Range irrigation and weather station

jp-gleyzes JP Gleyzes

DSO functions for a CRO

A digital camera for analog oscilloscopes

joseph-eoff Joseph Eoff

View all

Bits

JP Gleyzes wrote 04/29/2023 at 09:06

thanks for liking #Rezodo: Long Range irrigation and weather station

Are you sure? yes | no