0%

0%

Andrey

Embedded developer

Prague, Czech Republic

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/02/2021.

My Projects

Fuzz effect pedal based on well-known BigMuffPi

Fuzzpedal - guitar effect pedal

Projects I Like & Follow

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Hackaday Prize 2019

An open-source Arduino compatible remote controller (transmitter) with many customization options for robots and drones.

Alpha V1: Open-Source Remote Controller

alireza-safdari alireza safdari

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

a hardware sampler based on the raspberry pi running bare metal (so no Linux)

openSampler

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

goodwin GOODWIN

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

akio-sato Akio Sato

This device is for automating a timed inflation/deflation cycle for an inflatable vest.

Automatic Timed Inflation Device

Hackaday Prize 2020

This project demonstrates how to build a battery powered IoT Wi-Fi button in less than 10 min. This example controls HUE lights over IFTTT.

WiFi Button

Control and automate your electrical appliances from long distances(Kms) without the presence of the internet. This is possible through LoRa

Control Home Appliances Over LoRa | LoRa Remote

akarshagarwal98

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile

IoT Based Home Automation With Blynk and NodeMCU

Control two relays from Blynk or Touch Sensor using NodeMCU DHT11 sensor and LDR with real-time feedback.

Home Automation With NodeMCU LDR DHT11 Sensor

A wired remote control device that can wake up a computer so the computer can wake from sleep by the time you walk to it.

Remote computer wakeup device

karmanyaah-malhotra Karmanyaah Malhotra

Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.

Home Automation Using Arduino & WiFi Module ESP01

Hackaday Prize 2020

A device helping cerebral palsy patients with physical disability to move about just by thinking!!!

Mobilising Cap

Building this eurorack module from the PCB

DIY Nonlinear Circuits Vactroll PiLL build

2021 Hackaday Prize

180 Tie point solderable breadboard for electronics. 60mm x 70mm

Turtle Prototyping Solder Board

View all

Bits