4 |
× |
Stepper Motors
Nema 17 Stepper Motor 42BYGH 1.8 Degree 38MM 1.5A 42 Motor (17HS4401S) 42N.cm (60oz.in) 4-Lead
|
4 |
× |
Stepper Motor Drivers
DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988
|
1 |
× |
Red/Black Multi-Core Cable
For some internal wiring between switches, etc.
|
4 |
× |
Female Spade Crimps 6.3mm
For connecting to the switch.
|
1 |
× |
Electrical Tape RED
For sorting out the cabling nightmare.
|
4 |
× |
Stepper Cables
Should come with the stepper... Please don't get long ones! They're a nightmare to fit in the box!
|
1 |
× |
USB B Type Cable
Or whatever you need to plug the Arduino module in to your PC.
|
24 |
× |
3M Recessed Head 10mm Screws
|
1 |
× |
IEC Power Cable
Whatever you need for your power supply.
|
1 |
× |
Arduino Uno
Must be Uno pin compatible (3.3V or 5V). Longer boards will not physically fit!
|
1 |
× |
CNC V3.0 Shield
IndustrialMaker V3.0 Engraver 3D Printer CNC Shield Expansion Board A4988 Driver for Arduino
|
1 |
× |
DP(ST/DT) Power Switch
Needed the crimps bent to fit though... Vertical spacing issue! Digikey PN: 486-1440-ND
|
1 |
× |
High Voltage Range LED Module
Runs off of a huge voltage range! Digikey PN: PML50RGFVW-ND
|
1 |
× |
18V-35V Power Supply 40W+
Needs to physically fit, but the hole cutout will need to be modified to suit your choice. A higher voltage is better (faster steppers).
|
22 |
× |
Enclosure Parts
Uploaded in files. Includes enclosure lid/base, 4x stepper arms & 16x recessed screw adapters.
|
1 |
× |
Thick Double-Sided Tape
Holds done the power supply/uno. I used digikey part number: 3M159716-ND
|
4 |
× |
Rubber Feet
For the base of the enclosure. This will effect the sound of the unit depending on your table surface.
|