Scan surrounding Wifi

Back to overview

In this project, we use BW16 to scan available WiFi hotspots in the surroundings.

Daphne

1

Setup

First, make sure the correct Ameba development board is selected in Arduino IDE: “Tools” -> “Board” ->

Open the “ScanNetworks” example in “File” -> “Examples” -> “AmebaWiFi” -> “ScanNetworks”:
2

Final Result

Then upload the sample code and press the reset button on Ameba. Afterward, you can see the “**Scan Networks**” message appears, with the detected WiFi hotspots and the information of each hotspot.

Discussions