ESP8266-12E Programming & Testing Adapter

simple adapter to program and test esp8266-12e using pogo pins for solderless connections

Similar projects worth following
Made this adapter to program and test esp8266-12e modules. Since these modules would end up in my final build, I was looking for a solution that would let me program them without any soldering. Using pogo pins allows for simple connection without any soldering involved

Enjoy this project?



Chip Stewart wrote 03/10/2017 at 19:49 point

I'd like to try building this.  Could you send me the .brd or at least a schematic?

  Are you sure? yes | no

Ankit Bhatnagar wrote 03/11/2017 at 08:19 point

Unfortunately I lost those when I lost my hard disk. I only have the final artwork file which you can transfer to copper clad.

  Are you sure? yes | no

sbi.gaijin wrote 06/17/2016 at 23:48 point

Neat idea!

Looks as though it might benefit from a (non-conductive) hold-down across the tops of the pogo-pins (or perhaps just a second, unconnected solder pad under the body of each pin) to prevent vertical stresses from ripping them up off the (end) solder pads.

  Are you sure? yes | no

sk1tt1sh wrote 06/17/2016 at 22:36 point

Any chance you'd share the eagle file and parts you used for this?

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates