1. 01.

    Call for Speakers: Embedded Systems Conference 2019. Deadline extended from Jan 18 to Jan 21 (esc2019.c4p.eesubs.com)

    1 point Jasmine Brackett 4 days ago 0 comments
  2. 02.

    New Contest: 3D Printed Gears, Pulleys, and Cams (hackaday.io)

    0 points Mike Szczys 4 days ago 3 comments
  3. 03.

    Can CPU coolers be used for low temperature projects?

    1 point Peter Walsh 6 days ago 9 comments
  4. 04.

    Cheap PC Upgrades?

    0 points ActualDragon 01/12/2019 at 22:30 11 comments
  5. 05.

    Question: Is it worth buying electronic components from China? What online store do you recommend?

    1 point Oriol Casamor 01/12/2019 at 12:19 9 comments
  6. 06.

    New Hackaday Podcast published; facial-recognition, 35c3, IPv6... (hackaday.com)

    1 point Mike Szczys 01/11/2019 at 19:25 2 comments
  7. 07.

    Tool Tip: Simple jig for straight cuts with Dremel

    3 points Mike Szczys 01/10/2019 at 16:16 1 comment
  8. 08.

    Raspberry Pi HDMI to Composite Converter

    0 points Blair Vidakovich 01/10/2019 at 13:14 5 comments
  9. 09.

    Advice on bus drivers

    0 points 2-Zons 01/09/2019 at 22:19 7 comments
  10. 10.

    Notes for an MIT robotics course are available (underactuated.mit.edu)

    1 point Sophi Kravitz 01/07/2019 at 23:32 0 comments
  11. 11.

    Hackaday has tons of awesome contests coming up and we're looking for judges!

    4 points Sophi Kravitz 01/04/2019 at 15:43 4 comments
  12. 12.

    Host a Hack Chat (AMA) in 2019!

    3 points Sophi Kravitz 01/03/2019 at 14:58 0 comments
  13. 13.

    BLDC sensor-less control - how to ?

    0 points Wassim 01/03/2019 at 10:42 15 comments
  14. 14.

    IRQ - Hold and reset Circuit.

    0 points 2-Zons 01/03/2019 at 06:26 6 comments
  15. 15.

    Logisim memory editor

    1 point 2-Zons 01/02/2019 at 21:10 2 comments
  16. 16.

    What type of sensor do I need?

    0 points Sal 01/02/2019 at 18:35 5 comments
  17. 17.

    Control Circuitry Logic Problem

    2 points 2-Zons 12/30/2018 at 04:51 15 comments
  18. 18.

    ​Model rocket with active stabilization​​

    2 points Oriol Casamor 12/29/2018 at 12:16 2 comments
  19. 19.

    6809 in a C64

    0 points 2-Zons 12/29/2018 at 08:25 12 comments
  20. 20.

    Expanding My Arsenal Of Tools (hackaday.io)

    0 points Asher Gomez 12/28/2018 at 17:39 0 comments
  21. 21.

    Adding more than 6 pictures to a project gallery

    0 points 2-Zons 12/26/2018 at 07:41 2 comments
  22. 22.

    Lowest possible wifi camera with low power sleep?

    0 points James Newton 12/25/2018 at 21:03 4 comments
  23. 23.

    High (110) voltage DC motor driver with PWM / direction inputs for cheap.

    0 points James Newton 12/22/2018 at 01:01 9 comments
  24. 24.

    Ideal Hackspace Plant (www.newscientist.com)

    0 points Jarrett 12/20/2018 at 09:54 1 comment
  25. 25.

    ThingsBoard IoT platform, Arduino SDK (github.com)

    0 points Max 12/19/2018 at 15:56 1 comment
  26. 26.

    Hackaday Year-in-Review Podcast just released (soundcloud.com)

    2 points Mike Szczys 12/18/2018 at 19:07 1 comment
  27. 27.

    Driving OLED Displays Directly (hackaday.io)

    2 points ꝺeshipu 12/18/2018 at 12:36 0 comments
  28. 28.

    A Magazine for Hackers (hackaday.io)

    0 points Asher Gomez 12/17/2018 at 18:00 0 comments
  29. 29.

    How To Get Tech Help From Strangers On The Internet (www.pjrc.com)

    9 points Paul Stoffregen 12/10/2018 at 12:45 15 comments
  30. 30.

    Magic LEDs (sites.google.com)

    1 point Wayne Holder 12/07/2018 at 04:22 3 comments
  31. 31.

    Open Source Laptop (hackaday.io)

    0 points Asher Gomez 12/05/2018 at 15:33 0 comments
  32. 32.

    Fixing an optical illusion in a 7-segment font (fudging the design makes it look right) (hackaday.io)

    1 point Mike Szczys 12/04/2018 at 20:53 1 comment
  33. 33.

    Embedded Systems Conference (ESC) 2019 Call for Speakers Is Now Open! (Boston & Silicon Valley) (esc2019.c4p.eesubs.com)

    2 points Jasmine Brackett 11/28/2018 at 23:40 0 comments
  34. 34.

    Black Friday / Cyber Monday deals for the Raspberry Pi and Maker community (UK focused) (www.recantha.co.uk)

    0 points Jasmine Brackett 11/26/2018 at 10:47 0 comments
  35. 35.

    68000 Homebrew computer with video

    3 points 2-Zons 11/21/2018 at 21:30 2 comments
  36. 36.

    Hackaday will be at 35C3! Join us! (hackaday.io)

    0 points Sophi Kravitz 11/21/2018 at 19:15 0 comments
  37. 37.

    SPI flash chip recommendations please

    0 points Simon Merrett 11/15/2018 at 08:50 4 comments
  38. 38.

    Video Display Controller used on KIM 1 style computer for Monster 6502

    0 points 2-Zons 11/11/2018 at 21:41 2 comments
  39. 39.

    Interesting (?) Project Looking for Arduino Coder...

    -6 points Starhawk 11/07/2018 at 23:09 12 comments
  40. 40.

    Hardware Happy Hour (3H) Seattle Thursday - November 8th @ 7pm (meetu.ps)

    1 point Eric Moyer 11/06/2018 at 02:46 0 comments
  41. 41.

    Real Arduino for Quectel BC66 (hackaday.io)

    -2 points Georgi Angelov 11/02/2018 at 07:26 1 comment
  42. 42.

    Bring your Open Hardware Summit badge to Supercon

    0 points oshpark 10/30/2018 at 16:36 0 comments
  43. 43.

    superconference carpool from San Jose

    2 points jonathanfdillon 10/26/2018 at 20:52 0 comments
  44. 44.

    Open House at Advanced Assembly on Oct. 25th (blog.oshpark.com)

    1 point oshpark 10/18/2018 at 02:00 0 comments
  45. 45.

    Ban climate change denial from HaD?

    8 points Greg Kennedy 10/17/2018 at 22:01 28 comments
  46. 46.

    Looking for parts for projects in the Albany, NY area.

    1 point Mike Volckmann 10/09/2018 at 17:02 9 comments
  47. 47.

    Recommendation for hardware options on long-term audio recording and processing

    2 points huggybearikf 10/08/2018 at 03:38 8 comments
  48. 48.

    Hardware Happy Hour (3H) Chicago is Wednesday, October 10th (www.meetup.com)

    0 points oshpark 10/04/2018 at 22:32 1 comment
  49. 49.

    Maker Faire New York meetups this week and weekend (blog.oshpark.com)

    1 point oshpark 09/19/2018 at 17:58 0 comments
  50. 50.

    Building Radical Haptics at Maker Faire New York (makerfaire.com)

    1 point oshpark 09/19/2018 at 17:57 0 comments
  51. 51.

    PocketBeagle workshop this Friday at Maker Faire New York (makerfaire.com)

    0 points BeagleBoard Foundation 09/18/2018 at 18:38 0 comments
  52. 52.

    Bring-A-Hack New York this Friday night (www.eventbrite.com)

    0 points oshpark 09/17/2018 at 08:28 0 comments
  53. 53.

    Idea for robot arms / prosthetics

    0 points James Newton 09/13/2018 at 17:30 5 comments
  54. 54.

    Etekcity Voltson Smart Outlet, ESP8266 (www.amazon.com)

    -1 point AVR 09/10/2018 at 19:11 0 comments
  55. 55.

    History Makers Podcast (hackaday.io)

    0 points RoGeorge 09/04/2018 at 11:40 0 comments
  56. 56.

    powering sensors and wearables (goo.gl)

    1 point hansalbi 09/01/2018 at 11:57 1 comment
  57. 57.

    Ultimate Hardware Hacking Challenges @hardwear.io 2018. #HackFearlessly & Get Rewarded (hackaday.io)

    -1 point Pratik 08/29/2018 at 07:13 0 comments
  58. 58.

    Pondering an addressable LED controller (stuartl.longlandclan.id.au)

    0 points Stuart Longland 08/26/2018 at 10:26 1 comment
  59. 59.

    Resistive equivalent of an R2R ladder?

    0 points Simon Merrett 08/24/2018 at 17:52 7 comments
  60. 60.

    Linear actuator help

    0 points Jonathan Cousineau 08/16/2018 at 15:25 7 comments
  61. 61.

    Escape Room Toolkit

    1 point Dan Williams 08/16/2018 at 08:38 0 comments
  62. 62.

    LiFePO4wered/Pi+ campaign on Crowd Supply (www.crowdsupply.com)

    0 points Patrick Van Oosterwijck 08/12/2018 at 04:12 1 comment
  63. 63.

    Can you mute a followed list?

    0 points ziggurat29 08/09/2018 at 03:11 0 comments
  64. 64.

    SMD Tray or Mat for workspace, what do you use?

    2 points Richard Hogben 08/01/2018 at 21:23 4 comments
  65. 65.

    flextronics ga240pe1-00 Powersupply

    -1 point AVR 08/01/2018 at 11:56 0 comments
  66. 66.

    Survey on the Workflow and Collaboration of Makers and Their Community

    0 points Gino 07/31/2018 at 07:29 1 comment
  67. 67.

    ESP8266 soil moisture sensing gets dirty

    0 points helge 07/30/2018 at 23:05 2 comments
  68. 68.

    Any interest in an HDMI digitizer product?

    2 points Peter Walsh 07/25/2018 at 01:37 7 comments
  69. 69.

    hardpwn - Hardware Hacking Contest @hardwear.io 2018 #HackFearlessly (www.facebook.com)

    0 points Pratik 07/18/2018 at 11:14 1 comment
  70. 70.

    Coin cell stack holder?

    1 point Paul Andrews 07/17/2018 at 02:10 7 comments
  71. 71.

    #Badgelife Addons filling up Tindie (Trash Panda is a favorite of mine) (www.tindie.com)

    4 points Mike Szczys 07/16/2018 at 21:57 1 comment
  72. 72.

    Hackaday Superconference announced! 2-4 November in Pasadena. CFP open now and tickets available (hackaday.com)

    4 points Jasmine Brackett 07/11/2018 at 19:06 0 comments
  73. 73.

    Artwork / Graphics Design Contest for hackaday community (forums.hackaday.com)

    4 points Pratik 07/11/2018 at 06:40 0 comments
  74. 74.

    Can anyone recommend a good soldering station?

    1 point Peter Walsh 07/06/2018 at 16:36 17 comments
  75. 75.

    I2C-in-I2C tunneling

    0 points helge 07/06/2018 at 09:35 16 comments
  76. 76.

    Connect with other makers, and help people with disabilities (www.makersmakingchange.com)

    1 point Jarrett 07/06/2018 at 04:22 0 comments
  77. 77.

    The 100th Dorkbot SF is tonight (June 27) (dorkbotsf.org)

    2 points oshpark 06/27/2018 at 15:28 1 comment
  78. 78.

    All About ESP32 Series

    -3 points Yahya Tawil 06/25/2018 at 20:34 0 comments
  79. 79.

    Hardware Happy Hour (3H) Seattle (meetu.ps)

    2 points Eric Moyer 06/23/2018 at 17:42 0 comments
  80. 80.

    Join Brinc's 'IoT & Connected Hardware' / 'Drone & Robotics' Accelerator Programs! (www.brinc.io)

    2 points Bay McLaughlin 06/20/2018 at 03:39 0 comments
  81. 81.

    CH341A linux. I am running ubuntu 18.04 and the ch341a shows up as QinHeng Electronics CH341 in EPP/MEM/I2C mode, EPP/I2C adapter. Not as a UART. How can I change this

    1 point mmiscool 06/18/2018 at 18:53 2 comments
  82. 82.

    $250 Prize! 3D Printed Fast Furniture Challenge for Disaster Response! (re3d.org)

    1 point samantha 06/18/2018 at 01:53 1 comment
  83. 83.

    Jaromir just published a guide for flashing PIC32 firmware with an Arduino (can be used to upgrade Hackaday Belgrade Badge) (hackaday.io)

    0 points Mike Szczys 06/16/2018 at 16:17 0 comments
  84. 84.

    Latex Equation function broken

    0 points M. Bindhammer 06/13/2018 at 17:11 1 comment
  85. 85.

    Creating Custom Footprints in KiCad

    1 point oshpark 06/12/2018 at 19:52 1 comment
  86. 86.

    Join Founders That Are Unlocking Data And Improving Lives (brinc.io)

    0 points Bay McLaughlin 06/12/2018 at 15:52 0 comments
  87. 87.

    Hardware Happy Hour (3H) Chicago this Tuesday, June 12th (blog.oshpark.com)

    1 point oshpark 06/12/2018 at 06:14 0 comments
  88. 88.

    Looking for "USB Killer" Schematic

    0 points do0zy 06/10/2018 at 22:26 3 comments
  89. 89.

    Laser giveaway from Endurance lasers

    1 point tsybusovae 06/06/2018 at 14:10 1 comment
  90. 90.

    Little help? (forum.xda-developers.com)

    0 points ActualDragon 06/06/2018 at 12:55 0 comments
  91. 91.

    Hardware Happy Hour (3H) Chicago on June 12th

    0 points oshpark 06/05/2018 at 17:02 0 comments
  92. 92.

    Teardown hardware hacking restrospective (www.crowdsupply.com)

    0 points oshpark 06/05/2018 at 16:54 0 comments
  93. 93.

    SOT23 PNP Specific Pinout

    0 points leumasyerrp 06/05/2018 at 02:03 7 comments
  94. 94.

    How to measure real laser power output?

    0 points tsybusovae 06/04/2018 at 19:51 5 comments
  95. 95.

    Microsoft's acquisition of GitHub could be announced as soon as Monday

    3 points K.C. Lee 06/04/2018 at 00:23 11 comments
  96. 96.

    Apply TODAY to speak at Open Hardware Summit! (2018.oshwa.org)

    1 point oshpark 05/30/2018 at 17:57 0 comments
  97. 97.

    For Sale: LitePlacer Pick and Place Machine ($1300)

    0 points Gary Ebersole 05/25/2018 at 18:17 0 comments
  98. 98.

    Program Butterfly Labs ASIC Miner?

    0 points alan 05/25/2018 at 17:03 3 comments
  99. 99.

    Quickly review my burning man project and advise on technical solution (hackaday.io)

    0 points Alex Netsch 05/20/2018 at 01:48 0 comments
  100. 100.

    Hardware meetup tonight in SF

    1 point oshpark 05/17/2018 at 19:47 0 comments