10 July (Tuesday)

• Start making a live size prototype of the building using the corrugated board.

11 July (Wednesday)

11th Group Meeting & Discussion

• Discuss a way to make a custom working button for the building windows. The size and how to put it into the corrugated board.

12 July (Thursday)

Lecturer Advice

• Use washers on the folding of the triangle to secure the hole when tie up with cable tie.
• Change the design of the button to have better support so it doesn't fall off.
• Make a planner on what each person need to do. Have a smooth flow with progress every week.
• The buildings need to be clean when handling. Maybe use gloves to avoid smudges on it.
• The folding panel on the triangles looks very weird and might cause problems. Lecturer says to make it face outside and prioritise the interior than the exterior.

12th Group Meeting & Discussion

• Fabricated a template A , a piece of the roof for future reference.
• Make some minor adjustments to the size of the triangles so it doesn't look weird.
• Trial and error laser print the buttons for the building windows.
• Placing the wiring and LEDs in place on the triangle board.
• Code the LED for the stars. Suggested to make it white or slightly bluish for the LED stars.
• Connect wires on the button