Close

Body almost done

A project log for Ardumower Arctic Hare X2

3D-printed chassi for Ardumower

robin-frjdRobin Fröjd 08/07/2018 at 05:480 Comments

The body for the Ardumower is almost done. Fully 3D-printable in a 20x20x20 printer. Designed in Fusion360. The body was sliced in 17 parts. Next up is a finishing and painting. Total print time around 200h with 0.6mm nozzle and 0.28 layers. Here is a snapshot from behind 

Discussions