Final Assembly

A project log for Design and Build a Companion Robot for MS Care

The project aims to design and build a companion robot for aid in primary and secondary progressive Multiple Sclerosis care.

joshastley1joshastley1 03/27/2019 at 14:530 Comments

Once the internal assembly is working and tested it can be inserted into the 'skin'. This proved a challenge and, in my case, is not perfect. The final output is functional and serves as a prototype proof of concept of what can be done with minimal experience and cheap components. The pulsesensor was attached to the paw of the companion robot and the screen sits on the chest of the companion robot secured by connections to the arms of the panda.