A brief update for this weekend.

A project log for Flexible Coffee Cup Buddy

The aim of this project is to design a flexible PCB that can be attached to a coffee cup and will visually represent the temperature.

Billy-BogardusBilly-Bogardus 04/09/2019 at 04:070 Comments

Got a Preliminary board designed and am considering throwing out this design altogether.

My goal was to make it all fit within 2 sq in. and it does fit. Below is a 3D view of the board from KiCad.

Before I try a different design I will complete this one. There is a pesky footprint that half of the pads are not passing the DRC.

There was also a Via that was too close to another Via that I was able to nudge over to clear one more Problem.