16.04.2016 HydraBus HydraFW v0.7 Beta released (github)

• Fixed ultra slow build (because of built in rules…) thanks to tuxscreen post http://hydrabus.com/forums/topic/make-is-ultra-slow/#post-696 for the fix
• Updated ‘tokenline’ submodule to the latest version
  • Change T_ARG_INT to T_ARG_UINT, supporting only unsigned integers.

• Added freeform string as byte sequence (in addition to freeform integers) (thanks to Baldanos)
• Added Binary Modes full documentation in wiki
• Added Binary Modes (USB CDC compatible with BusPirate BBIO/Bitbang) with:
  • PIN mode to manage up to 8 GPIO pins (thanks to Baldanos)
  • SPI mode (thanks to Baldanos)
  • I2C mode
  • 2-Wire mode (thanks to Baldanos)
  • UART mode (thanks to Baldanos)
  • CAN mode (thanks to Baldanos)
  • OpenOCD JTAG (thanks to Baldanos)
• CAN (thanks to Baldanos)
  • Corrected filters handling. Now works for both CAN interfaces
  • Fixed bsp_can_rxne()
  • Fixed error in can2 pin description
  • Added speed change for CAN
• Optimized sump critical part and Lock Kernel during get_samples()
• JTAG scanner/debugger mode like JTAGulator (thanks to Baldanos)
  • Add support for TRST
  • Add support for MSB/LSB when reading

• Added in standalone mode sniffing LED indication #36 LED 2 ON for Standalone mode
• Fixed IRQ bug (stopped when enter/exit from sniffer or emul mode)
• Fixed Trf797xInitialSettings with workaround of Errata SLOZ011A–February 2014–Revised April 2015
• HydraNFC emulation commands are in alpha stage and they will be fixed in next version of HydraFW
  • Added in emul-mifare display of UID parameter when started
  • Added in emul-mifare 4 bytes UID parameter
  • Added emul-mf-ul command for Mifare Ultralight Emulation preliminary/work in progress code
• Added dm0 command => Direct Mode 0 Sniffer Test work fine mainly for test with a Logic Analyzer on PC2
• Added dm1 command => Direct Mode 1 Test (Work in Progress to test TX SDM & RX DM1)