I was supposed to do this tomorow or something, but Tetrinsic and TimerSpy are things I've needed since 5 years ago! I'm currently printng this concept:

I've added covers to the unused side (color model shown further down) and hopefully made a printable version of the chain:

Still, that's a lot of retractions in there. 

On the product design side, I had a slope that went over Finger5. I think it looks waterfall-esque:

I then tried like 3 different cover designs and went with the first one:

I was thinking of having the wrist chamfer be 45 degrees so that it and the black lines were parallel.

I admit, from the 3rd person perspective, this looks saaaaatisfyingly ordered, almost like I found this concept on Pinterest. However, I have concerns about the forearm bone lump if the TimerSpy slides down. The main reason is because it doesn't look as good from a 1st person perspective:

I will admit that my opinion of one or the other is largely in favor for 3rd perspective and ever so slightly against for 1st, thus it's likely that the larger chamfer will return. I've already got a plan for the bone lump should it become an issue.

Oh right, I haven't mentioned why the chamfer looks steeper than in the previous log. This is why:

I'd also like to mention that the diamond colum strat isn't the first time I've used it. I first used it in #Teti [gd0022]