Close

DAY 2 - FABRICATION AND SIMULATION

A project log for Fl'Air

This project will involve creating a wheelchair that is capable of sliding right into a paraglider!

Taruna KwatraTaruna Kwatra 02/13/2018 at 14:210 Comments

DAY 2: Completed sourcing of the materials for making the chassis based on the 3D modelling. Fabrication of the chassis was completed with bending, welding, and so on. And setup a simulator to test the load distribution of the chassis and harness. Based on our simulator testing, the harness of the parachute was attached to the chassis.

Discussions