Close

Preparation for final deployment at c-base

A project log for warpcore

The warpcore is, when 100% complete, a portable power generator with a max output of 1.209 gigawatts. Until then it's an Ambient Light.

WooDWorkeRWooDWorkeR 01/04/2016 at 13:090 Comments

The 32c3 installation of the warpcore was a kinda temporary installation with flying wires and because we need the power of the warpcore at c-base in a more long term installation i finally did a small board for connecting the MCU (Arduino Pro Mini) to the controll hardware.

And as one of the most professional ways to connect 2 or more things together is zip ties, we used them.

Discussions