This are some of my new ideas, which are not completely solved ;-)---------- more ----------Flux Generator (Only a prop with some blinking LEDs ;-)) Biggest Challenge: HousingSmall LED Light Engine - A node which could connect to other nodes and control...
Briefly: 80-wire IDE cables are *great* for high-speed stuff... But the pinout is a bit more difficult than a straight-through 40-wire IDE cable, because the 80-wire cables have shielding (yay!) which is connected to specific pins designated as ground,...
My project is about a Truck Simulator with a real Scania 144 (4-series) Dashboard and Steer sponsored by Vostruckparts Hedel The Netherlands.This project is started by Leon Bataille (inspired by Silas Parker) when he found a way to use VW Can-Bus equipment...
I did really like the idea of #PICTIL. So I did some research on this and on this page I will just summarize ideas. (mostly because all this in a comment would be to much I think). First the idea of using the PIC16F527 which @Yann Guidon / YGDES suggested....
Python Playground (No Starch Press, USA) is the culmination of a few years of playing around with Python, plus 2 years of writing (ouch!).It's a playful romp through Python - 14 projects ranging from drawing spirographs using Turtle and parametric equations,...
I am fascinated by the PiDP-8 and the follow-on PiDP-11 computers.Reading listGNU radio 1GNU radio 2avr makefileAnother simple formulabut I could not copy it to a comment.
Here is the power supply for the upcoming opamp regen. Three things are worth noting. 1. It is not necessary to use separate diode bridges for the positive and negative supplies. One will do, but I saw that after I built the board. 2. The power switch...
I am working on a project to read 4 analog inputs and control 2 analog outputs to measure current in 10s of microamp range. Using arduino or esp8266 E12 nodemcu...Also need to display it on my OLED display. Anybody interesting in helping/collaborate...
As probably a lot of folks here, I developed very slight hoarding disorder, known also as "impulsive midnight aliexpress shopping sessions" over the time I tinker with electronics. I buy stuff that goes into "messy box" and after a time I find out it...
An electronic excise and a table piece made for a themed party. A basic exercise in physical input-output using a servo logic. A breadboard with a servo, joystick, arduino nano, and a usb-to-serial adapter all sitting on a usb charger. A very short arduino...
During a visit to the ham swap meet at Northrop Grumman in Redondo Beach. It's always on the last Saturday of the month, and until now I haven't been in LA on the last Saturday of the month. Because I went to Sparklecon last week, I was also able...
I'm new here, and I'm not sure how this works. So if I violate anything I apologize. I'm going to give some info that might be vague because I don't want to advertise that I'm altering something that might get me in any kind of legal trouble. If you...
INSTALLATION DES DRIVERS USB NECESSAIRES A L'UTILISATION DE LATTICE DIAMOND SOUS LINUX UBUNTU 14MATERIEL:Device sur la carte MachXO2 Pico: LCMXO2-1200ZE-2MG132CES1104RH01PROBLEME:Au premier lancement de Diamond:Q: yoda@yoda-W253EU-SSD:~$ /usr/local/diamond/3.5_x64/bin/lin64/diamondR:yoda@yoda-W253EU-SSD:~$...
The main component of the analog front is an instrumentation amplifier. An instrumentation amplifier is a closed-loop gain block that has a differential input and an output that is single-ended with respect to a reference terminal. Most commonly, the...