Close

810 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸₩셔츠룸ⓤsilverⓞ"

  • MultiSpork

  • Note: this just got a major re-write. The heart of the MultiSpork (and the inspiration for it) is the new Maxim MAX11300, which is sort of a magical little chip. It has twenty I/O lines, each of which can be an ADC, a DAC, or a GPIO line. It can do these...
  • The Spice Must Flow Sand Table

  • This started out as a cable driven mechanism, but I converted it to belt drive when I found cables to be a bit too troublesome.  It's a single level corexy mechanism with 3D printed motor mounts, pulley blocks, and Y axis bearing blocks.  The...
  • DIY SamplePad Controller (MkI)

  • The requirements I need to meet are as follows: The controller must support a minimum of two Roland padsThe controller must be able to replicate the soundset of the Alesis Samplepad it will be replacingIt must be easy to add new soundsIt must be simple...
  • Personal portable 3G router

  • I'm building a custom 3G router for all my Internet needs. It's going to be portable, with battery backup enough to get through about half a day with more or less active 3G usage, able to be charged using 5V, so any USB socket would do if I needed network...
  • GPS Talking Clock

  • The timekeeping aspect of this project is very simple. While the GPS clock project had granularity down to the 10th-of-a-second, which required some interpolation, this clock only requires one second granularity. There is a need to keep a sub-second...
  • Three Phase Smart Electricity Meter

  • Data Logging and Visualization The ESP8266 provides measurements on http:///metrics in an InfluxDB compatible format: threephase,loc=main,phase=A,name=voltage_rms value=236.86 threephase,loc=main,phase=B,name=voltage_rms value=237.57 threephase,loc=main,phase=C,name=voltage_rms...
  • GPi Case + Raspberry Pi Zero 2 W

  • This Project's goal is to finally have a portable game and media console I will actually use. I'm very particular about anything I'll carry with me daily, so it's taken me a very long time to decide on the Retroflag GPi Case. I actually use this every...
  • Voidnet Viator Cyberdeck

  • ## BOM Other than the 3d printed parts (all FDM parts printed in black PETG, all Resin printed in Elegoo ABS-like clear-red) the following was used: ### Base- Raspberry Pi 4 (+SD card)- Corsair K65 RGB 60% mechanical keyboard (don't get too attached...
  • Z88 Tribute Computer

  • Adding project details, etc. over time as I reverse engineer my own project! Here are some specs of this machine: Customized Desktop / Workspace environment to honour the Z88 UIBuilt-in Application Suite to provide modern alternatives to the Z88...