Close

6880 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • Network Amplifier

  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...
  • Laser Welder Retrofit

  • So, where I stand now. I ended up using a Mesa 5i25 PCI card and a 7i76 step/dir control card. The Yaskawa servos have pretty good auto tune so I decided to leave the PID loop up to the servo drives.Speaking of servo drives, that and the servo motors...
  • Bruce the Shark

  • In the original configuration, the airswimmer is propelled by the tail fin, which can be flapped left-to-right using the remote. The whole fish can also be tilted up or down by moving the gondola, which holds the battery and receiver, forward and back...
  • Toy Claw Machine

  • The idea behind this project was for my sons birthday party. He wanted a robot themed party, so I figured this would be the easiest to build. Similar to the commercial claw machines, the idea is to grab a toy and successfully get it transferred over...
  • OCXO Sensitivity Measurement

  • For my GPSDO project I’ve opted for a Piezo 2940210 VCOCXO at 10 Mhz. There is a dearth of information on this particular module available online.(A notation notation: I utilize “E” notation to indicate orders of magnitude; thus 1.5E-6...
  • OpenXHC

  • Features:STM32F10x controller with hardware USB 2.0 FSRotary encoder ( quadrature output )Rotary switch ( 7 position )Switch buttonNOKIA 5110 LCD 84x48 [PCD8544]1.8' TFT 128x160 [ST7735R]EastRising ERC12864-4 COG LCD 128x64 [ST7565R]20x4 LCD [HD44780]Matrix...
  • LED Matrix Fairplay hack

  • Using an old Fairplay Scoreboard LED matrix to display scrolling messages (one of which was also for the kiddos birthday, scrolling "HAPPY BIRTHDAY")A PIC 16F870 was used for the controller.  The factory controller was ditched as I was unsure how...
  • Single vessel homebrew system

  • Based around an atmega32, the control board will control a solid state relay connected to a 2Kw heater inside my mash tun. The controller will also be connected to a pump that circulates the mash all the time. A ds18b20 is used to read the temperature...
  • piculear

  • piculearThis incomplete but slowly progressing project has the ultimate goal of producing a reliable PIC ICSP programmer that just works and can be more readily picked apart, examined, and/or replaced than a comparable Microchip programmer (for instance,...
  • Hexapod

  • The general idea is to use the PI and camera to perform the inverse kinematic equations and to perform obstacle avoidance, this information is passed onto the servotor32 board to set the servo positions according to the IK equations. Everything will...
  • HydraNFC Shield v1

  • Features of the HydraNFC embedded firmware HydraFW: Virtual Serial Port access through microUSB with VT100 terminal/shell (compatible with any hardware supporting USB Virtual Serial port). Basic UID read for Vicinity/ISO15693 (through shell command).Basic...
  • PC-Engine in a FPGA

  • The ROM images are currently stored in the parallel Flash memory of the board.I plan to add support for SD-Card, and find a way to connect either original pads or USB pads, so it would be possible to actually play games. As it will require some extra...