Close

6880 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Astrarium
  • Details     from Astrarium
  • There's an old hard-disk which I stripped down so that the front only has spindle coming through. I used a mill to face off some of the protuberances and other features which held the read/write head-arm in place.  At the bottom there is a PCB I...

  • Il D'oro Bass Guitar Amplifier
  • Details     from Il D'oro Bass Guitar Amplifier
  • I've wanted to build my own amp for quite a while. For bass guitar, the selection of amplifiers you can buy is pretty lack-luster, and mid-volume studio amps are hard to find. It seems like most of what's available is either a practice amp or a stadium...

  • reflow
  • Details     from reflow
  • Currently this bad boy has two modes: hit and hold. Hit turns on the heat until the set temperature is hit, then shuts off. Hold tries to hold the temperature at the setpoint.It also has a FTDI USB to UART IC, so it can be loaded with optiboot (after...

  • HydraBus v1 Rev1.5
  • Details     from HydraBus v1 Rev1.5
  • HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...

  • Network Amplifier
  • Details     from Network Amplifier
  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...

  • Laser Welder Retrofit
  • Details     from Laser Welder Retrofit
  • So, where I stand now. I ended up using a Mesa 5i25 PCI card and a 7i76 step/dir control card. The Yaskawa servos have pretty good auto tune so I decided to leave the PID loop up to the servo drives.Speaking of servo drives, that and the servo motors...

  • Bruce the Shark
  • Details     from Bruce the Shark
  • In the original configuration, the airswimmer is propelled by the tail fin, which can be flapped left-to-right using the remote. The whole fish can also be tilted up or down by moving the gondola, which holds the battery and receiver, forward and back...

  • Toy Claw Machine
  • Details     from Toy Claw Machine
  • The idea behind this project was for my sons birthday party. He wanted a robot themed party, so I figured this would be the easiest to build. Similar to the commercial claw machines, the idea is to grab a toy and successfully get it transferred over...

  • OCXO Sensitivity Measurement
  • Details     from OCXO Sensitivity Measurement
  • For my GPSDO project I’ve opted for a Piezo 2940210 VCOCXO at 10 Mhz. There is a dearth of information on this particular module available online.(A notation notation: I utilize “E” notation to indicate orders of magnitude; thus 1.5E-6...

  • OpenXHC
  • Details     from OpenXHC
  • Features:STM32F10x controller with hardware USB 2.0 FSRotary encoder ( quadrature output )Rotary switch ( 7 position )Switch buttonNOKIA 5110 LCD 84x48 [PCD8544]1.8' TFT 128x160 [ST7735R]EastRising ERC12864-4 COG LCD 128x64 [ST7565R]20x4 LCD [HD44780]Matrix...

  • LED Matrix Fairplay hack
  • Details     from LED Matrix Fairplay hack
  • Using an old Fairplay Scoreboard LED matrix to display scrolling messages (one of which was also for the kiddos birthday, scrolling "HAPPY BIRTHDAY")A PIC 16F870 was used for the controller.  The factory controller was ditched as I was unsure how...

  • Single vessel homebrew system
  • Details     from Single vessel homebrew system
  • Based around an atmega32, the control board will control a solid state relay connected to a 2Kw heater inside my mash tun. The controller will also be connected to a pump that circulates the mash all the time. A ds18b20 is used to read the temperature...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday