Close

6880 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • Arduino-based Dahlander switch

  • Dahlander motor switch replacement© J.N. Simonnet – March 2014Problem statementThis design is intended as a replacement for a 3-position switch doing 0/3000rpm/6000rpm/0 on a Lurem wood machine[1]. This switch is natively equipped with a mechanical...
  • Chameleon

  • The Chameleon Arduino-compatible shield board was designed to support two general application areas: (1) soft-core processors, and (2) intelligent serial communications interface. The board was constructed to be compatible with the form-factor of the...
  • Mini Altimeter

  • Years ago, probably in 2004/2005, I built an altimeter, consisting of MPX4115A pressure sensor, MAX1241 ADC, PIC18F258 (don’t ask me why this one, instead of more common 18F252 without CAN interface), 2x16 LCD, DS1624 to measure temperature and EEPROM...
  • Fourbit

  • Since I was born in mid-eighties, I've never experienced real 74xx build. Few gates here and there was common, but lager designs were practically unneeded - as microcontrollers, CPLDs or FPGAs replaced need for such as work. But my possession in vintage...
  • DIY CPLD board

  • The project will feature a XC9536XL CPLD from Xilinx.A CPLD is basically a simpler version of an FPGA - both are microchips. But what is a CPLD or FPGA for that matter and what makes them different from other microchips (as for example the ATmegas...
  • TeensyNet

  • The TeensyNet started as a way to monitor and control several fermentation chambers and beer storage coolers that I have scattered throughout my home. I wanted something that could be used either stand-alone, or controlled over a wired and / or wireless...
  • WeMo Garage Door Opener

  • ****PLEASE NOTE: While this system does nothing more than add an additional “button” to open/close the garage and does nothing to defeat the safety IR Beam on the door, I can’t say for sure whether the system is completely safe as the garage...
  • Starfleet Communicator Badge

  • This project won't have too many moving parts. Although our first intent was to get a BLE chipset and integrate it with some basic hardware to make the badge live, it turns out the chips we were looking at supported data only and weren't going to work...
  • Stubby the (Teaching) Hexapod

  • Since we started, Stubby has grown from a simple, direct-driven 2 DOF (degree of freedom) per leg frame to a mechanically-assisted 3 DOF per leg design with a full inverse kinematics engine (which allows the processor to calculate custom foot positions...
  • Bentendo 6004

  • This computer will be a learning experience for me. I will make many mistakes that you the reader will probably see long before I make them. With that said, input is greatly apprechiated. I am by no means an engineer (yet) but maybe this will help me...