Close

6880 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • RGB For 'Murica
  • Details     from RGB For 'Murica
  • All I did here was connect RCA jacks to the amps on the board that connects to the neck of the CRT. Composite video goes to the composite video input for sync. That's about it! If you do this yourself, just be aware that touching something in there...

  • Chalmers Robotics
  • Details     from Chalmers Robotics
  • Chalmers Robotics is a association where robot-builders meet up, build and discus ideas. The purpose of many of the robots that are built is to participate in Robot-SM, but many other kind robots is also built. Robot-SM is the biggest event that is organized...

  • Animatronic AVP Predator cannon

  • Details     from Animatronic AVP Predator cannon
  • Video of the finished animatronics-The chassis for this project was made entirely from Aluminum for durability. The arm uses a simple parallelogram mechanism in order to keep the cannon level as it raises up to the firing position and the arm end joints...

  • Custom Sonic Screwdriver
  • Details     from Custom Sonic Screwdriver
  • The OLED ScreenIt was bought at Adafruit. I made all the testing and code with it on a breadboard, when it was done I unsoldered the screen and necessary components and soldered everything back on an half SOIC-28 adapter (same sapcing as the ribbon,...

  • CadeBuntu
  • Details     from CadeBuntu
  • Using the gutted-out cabinet of an old arcade machine, I am constructing an Ubuntu-based arcade capable of playing both modern and retro games.The hull of the machine was purchased for less than $100 CAD at a local arcade -- salvaged from a literal graveyard...

  • Jimmy the mouse bot
  • Details     from Jimmy the mouse bot
  • This project was inspired by the Mousey from Make magazine.I wanted to build a robot which fits inside a mouse case and is controlled by a Parallax Propeller microcontroller.I listed some components I used, this list is not complete but the main parts...

  • Precision Reflow Oven Controller
  • Details     from Precision Reflow Oven Controller
  • In this project I will take a conventional toaster oven (any kind of toaster oven can be used) and design a precision controller to turn it into a reflow soldering oven. I know there are already plenty of controller kits available out there, but I hope...

  • Capacitive LiPo Balancer
  • Details     from Capacitive LiPo Balancer
  • This is still in a very limited state, I haven't even drawn any schematics yet!I would like to balance a 3s battery by just connecting a little board to its balance connector. A low power microcontroller (probably msp430) will be used to switch...

  • Automatic checkers
  • Details     from Automatic checkers
  • Time for technical details:1) Board recognition.We have used the camera (in android phone with IP Webcam app) to grab the photo of board and send it to the host computer. Next, the image is cropped translated to board square - then it is divided into...

  • Servo-Stock
  • Details     from Servo-Stock
  • So here we have the first set of parts for the ServoStock, a derivative of the Rostock using Closed-Loop control, a whole new com architecture, Servos for drive and NO STEPPERS. Pictured is the first attempt of the single axis using the Vitamins from...

  • D-DAQ
  • Details     from D-DAQ
  • A breif overview of why I started working on D-DAQ and what it's designed to do:Oh, watch it on youtube with annotations turned on please. I've included CC too.The original Doniol gauge used a 128x128 pixel, OLED displays and a MSP430 MCU. It tapped...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday