Close

1283 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • hackcase
  • Details     from hackcase
  • case is made from plywood found on the streets. there is some 5mm acrylic too, those i was buying cheap a4 size on ebay. wooden frame is held without glue, mostly little 3mm screws. board are mounted on 5x5cm, 10x10cm, 15x10cm wooden pieces,...

  • Tesseract Case
  • Details     from Tesseract Case
  • The case I picked up from Harbor Freight. I removed the top and bottom dividers and went to work. The bottom is framed in 1/4" wood for added strength and stability. The top also has a reinforced frame. On the outside are a video in, video...

  • Keyboard Computer
  • Details     from Keyboard Computer
  • After removing the battery, PC cards, speakers, LCD, and touch pad. I decided to remove the bottom half of the original case( I admit, I used a hacksaw) then I bent the middle frame to make space to reinstall the keyboard.The whole project is electrical...

  • Peril-Sensitive Sunglasses
  • Details     from Peril-Sensitive Sunglasses
  • This entry is a general writeup along with post-prototype observations.TO READ THE PROJECT PROGRESS FROM START TO FINISH (WITH PICTURES), CLICK HERE and start reading from the BOTTOM. This will let you read how the project came to life, the decisions...

  • Garage CNC Workshop
  • Details     from Garage CNC Workshop
  • Sound Dampening PanelsSound is an issue with any workshop, power tools are cool but make lots of noise. My workshop has the added benefits of being in a garage, close to neighbors and harboring a CNC table. My primary concerns are the air compressor,...

  • Chameleon
  • Details     from Chameleon
  • The Chameleon Arduino-compatible shield board was designed to support two general application areas: (1) soft-core processors, and (2) intelligent serial communications interface. The board was constructed to be compatible with the form-factor of the...

  • Stubby the (Teaching) Hexapod
  • Details     from Stubby the (Teaching) Hexapod
  • Since we started, Stubby has grown from a simple, direct-driven 2 DOF (degree of freedom) per leg frame to a mechanically-assisted 3 DOF per leg design with a full inverse kinematics engine (which allows the processor to calculate custom foot positions...

  • RikonV2
  • Details     from RikonV2
  • It's really amazing what you can do with the different development boards available today. This is my 3rd attempt trying to make an autonomous Robot , well more or less autonomous . RikonV2 is the successor of my previous Robot RikonV1 . At first i was...

  • D-DAQ
  • Details     from D-DAQ
  • A breif overview of why I started working on D-DAQ and what it's designed to do:Oh, watch it on youtube with annotations turned on please. I've included CC too.The original Doniol gauge used a 128x128 pixel, OLED displays and a MSP430 MCU. It tapped...

  • Zorkduino
  • Details     from Zorkduino
  • A few years ago I ported a Z-Machine player to a little arduino-like device. Ever since I have been meaning to get around to a project that would work on a TV with a real keyboard and once again rekindle fond memories of long nights playing Zork on my...

  • RpiFPV
  • Details     from RpiFPV
  • The general plan and choices made beforehandThe most important property of an FPV video feed is latency. When the latency of the video is too high, the plane becomes uncontrollable. Half a second is a lot of latency. Latency originates from multiple...

  • PIP-Watch
  • Details     from PIP-Watch
  • Hardware Block SchemaHardware is built around the STM32F103 microcontroller. CPU timing is derived from an 8MHz crystal; it provides a clock stable enough for an on-chip USB interface to function correctly. An auxiliary low-speed precision 32.768kHz...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday