Close

1283 Results for "《 예약문의 OIO↗8489↗8306》가라오케추천Κθrelease강남가라오케ⓠ선릉가라오케선릉가라오케㉷㎠청담가라오케austrian 청담가라오케⒣청담가라오케ョゐunnatural"

  • RosBot Kossel
  • Details     from RosBot Kossel
  • When I originally designed the printed parts for my RosBot the Vertex's were made to only have one 15/15mm vertical extrusion per corner. Once I started building and had the frame together I noticed there was a lot of twist and wobbliness and not much...

  • Articulated torso with arms
  • Details     from Articulated torso with arms
  • I use this form to create biometric shirts that fit me. For this I needed a form that was accurate in capturing my dimensions, but was also articulated so that I could test a garment as it undergoes extremes of motion.I could not find any good off-the-shelf...

  • Eyeproject
  • Details     from Eyeproject
  • I only have a rough idea for how to make this work. It occurs to me that instead of the attempts Google has been making with Google Glasses, that a better idea would be full projection into the eyes. The main device would be a unit which sits on...

  • TJ - $99 Thermal Imager
  • Details     from TJ - $99 Thermal Imager
  • IntroductionThermal Imaging technology used to be priced prohibitively outside the budget of hobbyists until recent years. Late 2012 when I started working on my 1st Thermal Imaging project, the lowest cost thermal camera available on the market was...

  • PIC32 scope, 1 Megasample/sec
  • Details     from PIC32 scope, 1 Megasample/sec
  • NTSC video synthesis and output --NTSC video is an old standard, but is still used in North America for closed circuit TV. It is fairly simple to generate a black/white NTSC signal. Also, the frame buffer for a 1-bit, 256x200 pixel image is only 1600...

  • Cat-644
  • Details     from Cat-644
  • Hardware IntroductionThe CAT-644, is a simple computer using a 20 MHz ATMega644 microcontroller as its CPU. I am using the DIP-40 package, making it breadboard and hobbyist friendly.  Large sections of this project can be built and run entirely...

  • Coil Gun
  • Details     from Coil Gun
  •                                                     Coil Gun WorkingCoil gun consists of a series of conducting coils arranged...

  • IoT featured soccer table
  • Details     from IoT featured soccer table
  • VIDEO DEMONSTRATIONPLAYER REGISTRATIONThe table itself is just a normal soccer table usually seen in bars and game arcades.Most soccer tables comes with a coin insert, though we didn't want our users at the LAN event to pay. Instead we wanted them to...

  • Capturing a Tuatara hatching
  • Details     from Capturing a Tuatara hatching
  • Looking back on this project there are things I will I had understood to start with. the main thing that caused the most headaches.But overall the project went well considering that I'd not done anything even remotely like this.. So.... here we goStep...

  • Insect Camera Rig
  • Details     from Insect Camera Rig
  • I plan on making an insect camera rig. It is inspired by the couple that have been posted to Hackaday and a few other commercial ones. To save money I am also going to make my own speed light flashes which will be permanently attached to the frame.System...

  • Contactless Loop Controller
  • Details     from Contactless Loop Controller
  • I had made a box to control the metal loop several years ago, and wanted to revisit the project to improve the design and make it more robust.The project originally started because the use of spring loaded sensing wires was not the best solution, but...

  • Speed-o-meter
  • Details     from Speed-o-meter
  • The heart of the system is an Arduino clone that is requesting the information, decoding it, calculating the rate since the last sample, and moving a servo to the correct position for that value. Addressable LEDs were also added that follow the position...

  • Poster VU
  • Details     from Poster VU
  • Here is the system design, the source code is available in the github link. The STL files to 3D-print the back mount and lid are included in the github repo.This was my original 3D render of what I had in mind, a 10 by 15 grid:I ended up using two poster...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday