Z-Uno was designed to allow people to make their own IoT devices for their Smart Homes. Many times we were asked "Is there a pressure/radiation/water level/.../whate ever sensor in Z-Wave?" and we found that it would be cool if people can make their...
The idea was quite simple. Buy a linear actuator from OpenBuilds with a stepper motor, attach a camera on top of it, two tripods below, assemble a control box with some Arduino-compatible, WiFi-enabled board and write an Android application that would...
The Technogym manual indicates that the RF HR receiver outputs a 5V and 30 ms pulse for each heart beat. A ESP32 with abilities will be the perfect µc. It's a easy job for it to read the incoming HR value and to output a pulse. Since the ESP32 works...
Today we present the FlameWheel Robot assembly tutorial and quick-start guide! It is rather difficult to assemble this robot without guidance. Feel free to refer to my introductory tutorial today.Flamewheel (A 2WD Remote Control Robot) is part of our...
In this project, we will build a 2.4GHz Wlan scanner using the nRF24L01 radio board. In this project, the output delivers all the interference and information in the scanned area in the form of ASCII codes. In the project of making this scanner,...
Recent achievements:Battery build: Orthophotomaps: Simple mapArea measurementsMap with elevation data Endurance flight: Project: As the name of the project implies, I wanted to come up with a free-to-share UAV concept for a capable plane...
The whitestar project is my attempt at building a reliable and fully automatic wardriving equipment for permanent installation in my car. It's used to constantly gather 802.11 data for research purposes and contribution to the https://wigle.net crowdsourced...
20200731 : cleanup of many dead links... This page serves 2 purposes : share the resources I have created for all those articles (because http://ygdes.com/sources/ and http://ygdes.com/GHDL/ are not the most convenient) maintain a somewhat not-too-inaccurate...
Links to project details (GIT, Wiki, Docs) are on the left. The laziest intro to this project is the 2-minuite video created for THP Quarterfinals (i.e. the first video I made):Or even better, see my full 5-min final video (there is also the semifinal...
COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...
The OriginsWhen we decided to throw a party in LA (which became know as The Gathering) I wanted it to be more than just free t-shirts and beer. Laser Graffiti popped to mind and I was glad that Ben was willing to take the lead on that project....
Hardware used. Seeeduino v1.1 Phaktor bought this a few years back, played with it a couple of times but it just sat in his hobby bin ‘til now. Parallax LCD http://www.digikey.com/product-detail/en/27977/27... bought from RadioShack...
This is for the large blue box version of the YOOCNC 3020/6040, since it fits in the existing PCB stand offs and uses the same connectors.I added inputs for limit switches etc, so they just have to be run around the machine and a few micro switches added...