Close

2317 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

  • TRS-80 Model 1 on a PIC32
  • Details     from TRS-80 Model 1 on a PIC32
  • I did this project to keep myself occupied while recovering from some surgery in 2015, for which I would have limited mobility for about a month. I didn't think I'd be up to doing bench work, so I used some existing PCBs to allow me to focus on the firmware,...

  • Dial-up modem "side track"
  • Details     from Dial-up modem "side track"
  • This "project" exists, because the only way to connect my Powerbook G3 to Internet is via its 56k modem; I like to browse old sites via Wayback Machine proxy for fun. Its Ethernet chip has disappeared and Airport card isn't here yet. However, hauling...

  • Tennis Court Status Updater
  • Details     from Tennis Court Status Updater
  • 8-13-14 This project is brand new and probably too late for the Hackaday Prize, but whatever...It is based on an Electric Imp (www.electricimp.com)  that very easily connects a sensor or switch to the Internet. This is the type of project where...

  • The Chocolate Box News Reader
  • Details     from The Chocolate Box News Reader
  • Reason for Building"Worst case of scope creep I've ever seen." -Ron Grimes February 1, 2017 It started with a Raspberry Pi and the dumb 4x3 keypad, and a question: "I wonder if I can drive the keypad?" Well, Yes, after some tries, and some inspirational...

  • CarbOnBal
  • Details     from CarbOnBal
  • The picture on the main page is the second prototype. It shows the tubes I use for calibration of the sensors. I have to calibrate the sensors because they don't all give exactly the same readings out of the box. The tubes are used to tie them all together...

  • Espruino ISS Notifier
  • Details     from Espruino ISS Notifier
  • To begin with, I wrote the code contained in the gist here https://gist.github.com/gomako/4bcd3731af11896e7985f0d88a0af0a5 and made it flash the in built LED on and off on the Espruino (https://www.espruino.com/Pico) board. I've tried to comment...

  • Storage boxes rack
  • Details     from Storage boxes rack
  • Because of the box design, the side guides can't be a straight but have a step. The guide i design is to be cut on CNC router from 3/4" plywood or MDF , but can be 3D printed as well. Since the middle wall is 1/2" the guides should be either attached...

  • Portable R2D2 raspi wifi bridge
  • Details     from Portable R2D2 raspi wifi bridge
  • I had this idea when I realised that the PiZero fits perfectly in my R2D2 mint box.Since the PiZero is impossible to find I started working on a Pi 2 and bigger mint boxes.The idea is to have a battery powered box that offers a terminal via bluetooth...

  • 100% reusable electronics
  • Details     from 100% reusable electronics
  • Images cannot be in the project section so here is a recap so you get the idea: Suppose I give you a battery a resistor and an LED. Can you not simply by holding the parts in your hand make the LED light up? All you need is for things to make contact...

  • JFCYLB Cable
  • Details     from JFCYLB Cable
  • Two independent events led me to make this.1) My favourite 6inch micro USB cable got mashed in our overfull glove box on a climbing trip in France. The micro connector was all bent, but I eventually got around to squishing it back into shape with pliers....

  • WoZ Bluebox hardware recreation
  • Details     from WoZ Bluebox hardware recreation
  • There was a problem though: The blue box apps for android are bad! some are unstable/don't work or haven't been updated to work on newer devices, some output bad tones so you have to use multiple apps to complete one call, and ALL require the use of...

  • Arrakis Sand Table
  • Details     from Arrakis Sand Table
  • I'll be posting a lot of details to my blog, and post a link to it soon. In the meantime, here is some basic information about the table. General I put a lot of effort into making the mechanism and electronics reliable and quiet., and largely succeeded....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday