SolidCore CoreXY CAD Design In Fusion 360 All Metal Parts Our long term goal is to is to build a modular platform, not just a printer. Think of it as an ecosystem of parts that can be arranged in different configurations and adapted for unique applications....
Hardware ESP-32: The ESP32 makes it easy to use the Arduino IDE and the Arduino Wire Language for IoT applications. This ESP32 IoT Module combines Wi-Fi, Bluetooth, and Bluetooth BLE for a variety of diverse applications. This module comes fully-equipped...
Original forum discussion from January 2017: https://www.brutman.com/forums/viewtopic.php?f=1&t=607 One of the slots (2x15 contacts) of IBM PCjr are intended to be occupied by modem, so we can re-use it, because that modem was useless anyway ( 300...
In another page, I described my adventures converting an Ubuntu DEB package to an RPM package. This provided me with a native toolchain for my Linux workstation. I wished though that there was a solution that would allow far more Linux users, no matter...
1. Introduction Application is 64 steps note looper. Notes are either represented musically or treated as bare data for VCS’s audio registers. Users can choose which row they treat as notes (Note Synth) or audio register data (Glitch Synth). There are...
This project is inspired by the nostalgia for portable devices like USSR "Электроника МК-90" and Texas instruments TI-92. END USER REQUIREMENTS (An Ultimate Hacking Machine):o Retro look and feel. PWR,...
Introduction In this post I'll recap the development of a cloud-connected, solar-powered water quality monitor that I built for Voltaic Systems from May to August of 2017. Beginning the project, I was about halfway through the Arduino...
In this project, we will build a 2.4GHz Wlan scanner using the nRF24L01 radio board. In this project, the output delivers all the interference and information in the scanned area in the form of ASCII codes. In the project of making this scanner,...
3-11-2024 See these two 2011 Liliputing and TechCrunch articles, which were partly the inspiration for this project: https://liliputing.com/pixel-qi-suggests-low-power-tablets-could-be-powered-by-1w-solar-panels/(6-3-11) https://techcrunch.com/2011/06/04/first-solar-powered-laptop/ (6-4-11)...
Today we present the FlameWheel Robot assembly tutorial and quick-start guide! It is rather difficult to assemble this robot without guidance. Feel free to refer to my introductory tutorial today.Flamewheel (A 2WD Remote Control Robot) is part of our...
The story so far... Update: Row scanning working.Known/working: Building and loading via JTAG new firmware into the main FPGA. This firmware is starting from scratch, we don't understand much yet about the default Barco firmware, although we've dumped...
EDIT: I am correcting the details of the project indeed since the beginning in 08/22 the project has evolved a lot. Will we run out of water? There is water almost everywhere on earth but when we talk about fresh water, there is only 2.5% on our planet....
Licencing and IPAll codes/scripts are hosted at: www.MichaelRatcliffe.com/projects[Will be updated before the 22/9/2015]Everything is released as Copy Left, For more info:>LicencesProject Prefaceabout me: Graduated with a Degree in Mechanical Engineering...
The Bankswitch cartridge implements the three most common schemes named F8, F6 and F4. The working of the bankswitches is depicted on the table below. Address -Address Lines-- Bankswitch/Bank selected 1 11 8K 16K 32K 2 1098 7654 3210 F8 F6 F4 $1FF0 0001...
Background If you have been following Hackaday for a while, you will have seen on numerous occasions the KENBAK-1, regarded by many as the first commercial personal computer. Ten years ago Mark Wilson introduced KENBAK-uino, a reproduction...