Close

98 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

  • CNC Mod Pack
  • Details     from CNC Mod Pack
  • The core of this project is the mounting bracket that allows anyone to create their own mounts. The dimensions of the bracket are shown below so that anyone can use it as a starting point when designing their mounts. The idea behind having a slot in...

  • Mantis Microscope Repair
  • Details     from Mantis Microscope Repair
  • I modeled up a new mounting bracket based on the remains of the original bracket (in the photo above) and a few assumptions along with plenty of measurements. The bracket was 3D printed using my Tronxy P802M printer using white PLA with a layer height...

  • 3D Printed Pendulum Clock
  • Details     from 3D Printed Pendulum Clock
  • A pendulum clock is conceptually very simple.  A spring or falling weight provides energy to a swinging pendulum that swings at a constant rate.  A series of gears convert the pendulum motion into a display for the hours and minutes. ...

  • Mini Milling Machine DIY
  • Details     from Mini Milling Machine DIY
  • I would like to be able to machine small mild steel and aluminum parts at home for my projects. A commercial milling machine costs at least about 1000 usd / eur and even the smallest models are too big for my small home workshop. This router is slightly...

  • DIY Oil Filter Cutter
  • Details     from DIY Oil Filter Cutter
  • I used 1/4" thick bar stock as the base of the cutter. I laid out the initial design using a black sharpie and once I was happy with the design, I used copper sharpie to trace over the cut lines so that I could easily see and determine which lines were...

  • Poor Mans Paslode
  • Details     from Poor Mans Paslode
  • I have to admit that I am a garbage scow.  I find use in all kinds of discarded stuff.  This gives me a huge advantage when it comes to building things on the cheap.  This is a good case in point. I found a curbside pile that had all kinds...

  • AVR TransistorTester
  • Details     from AVR TransistorTester
  • At this stage I am collecting required parts and checking comparability of parts with code. Next stage will be design of PCB.MicrocontrollerI am planning to use Atmega328PDisplayI want to use graphic LCD display. So it was not simple to understand which...

  • Prensa de banco de escritorio
  • Details     from Prensa de banco de escritorio
  • La primera pieza que se imprime es la base. Esta tiene una plataforma de 250 mm de largo por 100 mm de ancho, teniendo una altura de 10 mm. Por el costado de esta plataforma esta una abertura semicircular que contiene una abertura en donde pasa un tornillo...

  • The Quub
  • Details     from The Quub
  • QUUB is an open-source, micro controller system based on a core processor, addressable daughter boards, and remote IO modules. It is a general-purpose embedded microprocessor system, the form factor is based on a main MCU board and multiple stacked...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday