98 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

JamLoopy for Atari VCS
Details from JamLoopy for Atari VCS
1. Introduction Application is 64 steps note looper. Notes are either represented musically or treated as bare data for VCS’s audio registers. Users can choose which row they treat as notes (Note Synth) or audio register data (Glitch Synth). There are...

Tiny Radio Telescope
Details from Tiny Radio Telescope
What it can do: This radio telescope takes pictures in radio (on frequencies between 10.7Ghz and 12.75GHz). Theoretically, this radio telescope should be able to take pictures of the sky, in radio. If the dish is aimed properly, the results should create...

Automatic transmission system for bicycles
Details from Automatic transmission system for bicycles
4 Panasonic / Sanyo CGR18650CG 2200 mAh LI-ion batteries were used to power the motor drive and arduino. One battery provides a rated voltage of 3.6 volts. Batteries are connected to each other in series and 14.4 volt voltage is provided. However, this...

Raspberry Pi 3 Desktop a 7-yr-old Can Build & Use
Details from Raspberry Pi 3 Desktop a 7-yr-old Can Build & Use
Follow me on Twitter: @SteveSchuler20 and right here on Hackaday: KRA5HAlarming Decline in Science LiteracyWe are starting to see an alarming decline of science literacy in the United States. The US continues to be the most scientifically and technologically...

XL6009 Step-up Power Module DC-DC Converter
Details from XL6009 Step-up Power Module DC-DC Converter
Feature: 1.XL6009 Step-up Power Module uses XL6009 as main control chip to realize broader scope of application about boosting. 2.It shows the adjusted results intuitively with the digital tube. 3.There is no need to use the multimeter, which will be...

Robot grający na ksylofonie
Details from Robot grający na ksylofonie
1. Cel: Celem pracy jest wykonanie projektu urządzenia mechatronicznego lub kluczowego elementu urządzenia mechatronicznego, zbudowanego na bazie podzespołów LEGO oraz przeprowadzenie procesu projektowego zgodnego z rzeczywiście używanym...

Minamil: a minimal CNC mill - HaDPrize 2021
Details from Minamil: a minimal CNC mill - HaDPrize 2021
Please click through to the ongoing project #Minamil: a minimal CNC mill ! This project here was temporary for the 2021 HaD Prize Winning a finalist slot was great and much appreciated! – and done! Thanks for checking out my project! For whatever...

ESP_8_BIT: Atari 8 bit, NES and SMS on an ESP32
Details from ESP_8_BIT: Atari 8 bit, NES and SMS on an ESP32
ESP_8_BIT is designed to run on the ESP32 within the Arduino IDE framework. Schematic is pretty simple: ----------- | | | 25 |------------------> video out | | | 18 |---/\/\/\/----|---> audio out | | 1k | | | --- | ESP32 | --- 10nf | | | | | v gnd |...

Board & Bolt Tripod Platform
Details from Board & Bolt Tripod Platform
Components:Laser cut Acrylic sheet (via ponoko) 1/4-20 Hex Nuts (Home Depot)1/4-20 3" or 4" long bolts (Home Depot)1/4" washers (Home Depot)3/8-16 Hex Nuts (Home Depot)Super Glue (lots of super glue)Step #1: Designing the board.So, I was inspired by...

Zeiss Surgical Arm Monitor Stand
Details from Zeiss Surgical Arm Monitor Stand
Have a spare surgical arm lying around? Why not turn it into an overkilled monitor stand?At my work, we had an old Zeiss surgical microscope arm lying around (without the microscope). It's very tall and heavy, but has nice adjustable joints with very...

Simplest wifi car using ESP8266 Motorshield
Details from Simplest wifi car using ESP8266 Motorshield
ESP motorshield There's not so much information on the Internet about this board. First of all this shield for ESP-12E Dev Kit and NodeMcu boards and not for all, because width between pins is 25mm and that's not enough for some boards like LoLin. In...

Hot Wire Foam Cutter
Details from Hot Wire Foam Cutter
Required parts: 1 x 8 mm round aluminum tube.1 x 10 x 12 mm rectangular aluminum tube.1 x 0.25 mm nichrome wire.12 x 8 mm round adhesive bumpers.1 x 3mm round metal spike.4 x M3 x 8 mm flat screws.6 x M3 x 14 mm countersunk screws.1 x M3 x 10 mm flat...

ReRouter - Make an Extensible IoT Router
Details from ReRouter - Make an Extensible IoT Router
Step 1: What do we needShow All ItemsLinkIt Smart 7688 DuoGrove – Led StripGrove - Temperature&Humidity Sensor (HDC1000)Grove – RelayBase Shield V2Arduino Breakout for LinkIt Smart 7688 DuoEmbedded Thermal PrinterStep 2: WiringNow, we should connect...

Pilot Light Flame Sensor for Burning Man Art
Details from Pilot Light Flame Sensor for Burning Man Art
As a safety precaution, certain types of fire art installations are required to use sensors on their pilot lights. If wind blows out the pilot, the gas must automatically turn off and other valves controlling high pressure propane directed at that...

The Trash Printer - Version 3
Details from The Trash Printer - Version 3
The Trash Printer was inspired by the Precious Plastic movement, a global, open-source, small-scale plastic recycling movement! It started with 4 open-source machines - a shredder, an extruder, an injection molder, and a compression oven. Since the...

1
2
3
4
5
>
>|