Close

4059 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격ㅱ ╈proprietary８셔츠룸후기셔츠룸추천ヰamidst 선릉셔츠룸셔츠룸추천 셔츠룸추천※셔츠룸추천ㄴhandle㏉"

  • Bug Robot
  • Details     from Bug Robot
  • This robot counts with a multiplataform PCB that allow the programming to be done with Arduino Uno R3 or with STM32 Nucleo. An Ulstrasonic Range measurement module was mounted in a 9g servo to be possible to detect obstacles in front, left or right of...

  • STM32G4 Scope
  • Details     from STM32G4 Scope
  • Introduction In the past, I have undertaken projects involving portable oscilloscopes with high-speed ADCs (as seen in RPScope). However, in this endeavor, I am committed to streamlining the electronics to the utmost extent and utilizing only the capabilities...

  • Agrofelis Robot
  • Details     from Agrofelis Robot
  • Agrofelis Robot Multipurpose Energy-Dense, Implement Carrier Agricultural Robot. A Programmable, AI-Ready Precision Agriculture Base Vehicle. The Problem The convergence of declining demographics, economic disparities, rising energy costs and supply...

  • LayerOne 2014 Conference Badge
  • Details     from LayerOne 2014 Conference Badge
  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...

  • Photo Light Table
  • Details     from Photo Light Table
  • Notice the PCB colors?  These are from the very early days of Laen's DorkbotPDX group PCB order, before the boards were purple and it became OSH Park.

  • Astrarium
  • Details     from Astrarium
  • There's an old hard-disk which I stripped down so that the front only has spindle coming through. I used a mill to face off some of the protuberances and other features which held the read/write head-arm in place.  At the bottom there is a PCB I...

  • Bruce the Shark
  • Details     from Bruce the Shark
  • In the original configuration, the airswimmer is propelled by the tail fin, which can be flapped left-to-right using the remote. The whole fish can also be tilted up or down by moving the gondola, which holds the battery and receiver, forward and back...

  • OpenXHC
  • Details     from OpenXHC
  • Features:STM32F10x controller with hardware USB 2.0 FSRotary encoder ( quadrature output )Rotary switch ( 7 position )Switch buttonNOKIA 5110 LCD 84x48 [PCD8544]1.8' TFT 128x160 [ST7735R]EastRising ERC12864-4 COG LCD 128x64 [ST7565R]20x4 LCD [HD44780]Matrix...

  • PCB mill for under $10
  • Details     from PCB mill for under $10
  • NOTE: This project is gradually improving. It is fully functional at this point, but it could be better.It started as a pen plotter based on the entrails of a printer. It uses a pen to draw paths from a vector graphics file(SVG file). I wanted to make...

  • Open Source DSKY
  • Details     from Open Source DSKY
  • The original software that DSKY were all written in a assembler called YUL (“Yuletide”). Although the source code for DSKY are available on line, not everyone understand the language itself. Because of this, I plan on converting the programming...

  • VFD and Keypad re-use
  • Details     from VFD and Keypad re-use
  • I recently picked up an old DVD player from the side of the road - a Pioneer DV-363 - mainly for recycling parts.  Upon opening I found the VFD display and half the keypad sat on a separate PCB, and used a basic serial interface.  I thought...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday