For this project, I was inspired by this project: link At first, I got my hands on a second hand radio flyer tricycle. The challenge was to add invisible motors and electronics to keep the illusion as realistic as possible. This was quite a challenge,...
The “Crivit Sports” wrist watch HRM (Heart Rate Monitor)This is a wrist watch that can also display the heart rate BPM (Beats Per Minute)..The complete specs and the user manual can be found at http://www.lidl-service.com/cps/rde/xchg/SID-648946E8-5F850FDD/lsp/hs.xsl/product.html?id=47039228.The...
Introduction Bipolar is not only a disorder but also a requirement for power supply for some devices. While most electronics is OK with a simple plus and minus, some will also require a mid-point, often called ground. It does not have to be connected...
This completely open source project breaks down into four main parts. 1) Part 1 -Seismic sensor From Wikipedia, the free encyclopedia - "In geology and other related disciplines, seismic noise is a generic name for a relatively persistent vibration of...
WHO IS THIS INTENDED FOR?1) people like me who want a quick way to test ducky scripts before actually putting them on the rubber ducky (every time I pull it out of its case I feel like I'm going to break it or something).2) those who don't yet own a...
We will see how the final project turns out as anything can revert or happen to make it happen. It is not about easy and streamlining time and funds too much as this is where the art will come from as I've spent my whole life building the...
I started by trying to 3D scan in the headphones stripped of the stock rubber in order to model the covers off of. Unfortunately, since they're black and shiny, they don't scan particularly well. So, nothing some time and calipers won't solve, right?...
up at the top is a ‘3 way’ navigation switch. Anyone old enough to remember the sony erricson phones of old might know this as a ‘jog dial’. This offers a left and right nudge, as well as a center press, all of which could be mapped to extra functions...
Goal To create a portable robot (should fit in a hand luggage) that could traverse almost any surface, would be able to carry a significant payload (at least 0.5 kg) and manipulate objects. Current state Here is a summary video of robot's abilities:...
I like to design parts that work straight off the printer bed. This part is no exception. It needed to stop wires running into the engine bay from contacting and wearing against the metal surfaces found in the engine bay. It also needed to use simple...
This 3d print gun is semi-automatic. You just have to pull back the latch while shooting. In this way, the bullet slot is opened. Bullets fall into slot sequentially, by the gravity. And boom! The rubber band provides the energy to launch the bullet....
The Prius rear hatch release switch is covered with some sort of black rubber that deteriorates with exposure to weather. My had gone through the usual phases of first getting sticky and gooey, leaving black yuck on my fingers every time I used...
The idea with this project is to replace the multitude of dice that are used with many games, like DnD, with an electric version that still gives the experience of real dice. One die to rule them all! With tiny displays on each side and...
Product stage: End of Life "You know. Analog inputs for the controls would be very nice. Buttons to control other portions like landing gear, lights and brakes would also be wonderful. And maybe a throttle stick. And a VTOL/Trim stick for when I...
The chassis and suspension were designed from scratch, with modularity and budget in mind. I used the 1cm x 1cm MakerBeam Starter Kit, plus the add-on corner cube and bearing hinge kits, and designed my own joints and servo brackets which...