Close

8703 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Analytics Lounge
  • Details     from Analytics Lounge
  • Born out of the realization that not everything worthwhile is about making something physical, Analytics Lounge specializes in the world of Test, Measurement, and Analysis.While we do have some pretty interesting capabilities for prototyping we have...

  • Advanced bench power supply
  • Details     from Advanced bench power supply
  • This is an ongoing longterm project to create dual channel precision bench power supply 2x50W with ultra low output ripple, fully programmable and adjustable from PC. Output channels are independent or connected in series or parallel. It will contain...

  • Mini 3D printable crossbow
  • Details     from Mini 3D printable crossbow
  • The springs are sections from a spring from an old wind up clock wich had snapped. I use toothpicks as arrows. The wire i used was some I had lying around. The parts are printed with my HE 3D rerprap prusa I3 3D printer. I use a little spring to push...

  • Minimalist Li-Ion Cell Welder
  • Details     from Minimalist Li-Ion Cell Welder
  • Some heavy gauge copper wiring (or sheet copper in my case), a starter solenoid, a microswitch, and two copper contacts (solid copper roofing nails).   I added a bit of polycarbonate and some rivets to keep everything in place, and soldered...

  • Beat707
  • Details     from Beat707
  • In 2017 William Kalfelz started with some cheap 7-segment / button boards from eBay and an ATMega to implement a MIDI sequencer. See this video:Later Gert Borovčak built a version as well and helped improving the firmware with William. He even...

  • Do or Donut SAO
  • Details     from Do or Donut SAO
  • From the picture it looks almost done, but far from it! This was just a layout test. I need to redraw everything, make it smaller and find out the arrangement of the LEDs first. Some things have to be fixed in software, as the original layout for...

  • A BlueButton in Three Steps
  • Details     from A BlueButton in Three Steps
  • Step 1: Test with Xenon and a relay. My old remote to garage was broken. So I made a small board with a relay. Then hook it up with a Xenon from Particle. However the Xenon by default is used for Mesh network. So I have to flashed a UF2 bootloader to...

  • Vulcan Scanner
  • Details     from Vulcan Scanner
  • This project will involve some construction techniques for encasings I have not tried ever before, so it will take some turns, I’m sure. It will involve 3D-printing some parts. This project will also involve as many sensors I can get working and can...

  • Desert BRAT Microcamper
  • Details     from Desert BRAT Microcamper
  • I've finally started this project, something I've been meaning to do for a while -- the BRAT has plenty of storage in the truck bed, but no place to sleep on road trips. Now that I've got a camper shell, time to fix that -- I know I can (and have) fit...

  • InoDex
  • Details     from InoDex
  • I will use mini geared motors to actuate each one of the fingers individually and 2 of the motors to actuate the thumb and perform the thumb roll. I think with an automated thumb roll the InoDex prosthetic hand will be able to better simulate the human...

  • DirtQuad
  • Details     from DirtQuad
  • I've done some research on everything, and I found some very interesting links:Quad:This is where I got the idea on how to build the quad, here and here.I'm building the same frame but with DIY electronics.As about the electronics of the quad here is...

  • Audio Amplifier Hack Chat
  • Details     from Audio Amplifier Hack Chat
  • Join the Audio Amplifier Hack Chat by clicking on the JOIN HACK CHAT button. Then, request to join #Hack Chat. Don't request to join from this page, click the JOIN HACK CHAT button. Come hang out for 30 or so minutes and talk to Jørgen Kragh Jakobsen,...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday