Close

8703 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Cetus 3D heated print bed
  • Details     from Cetus 3D heated print bed
  • The idea is quite simple: Stick some resistive wire under the build plate and tap into the 19V power supply of the Cetus to heat it up. I started by drawing some guide lines on the under side of the Cetus' build plate: I then covered everything except...

  • DIY Smartphone
  • Details     from DIY Smartphone
  • Notice: this project's name has been changed from "Tyfone" to "TyTelli" to avoid confusion with Tyfone Inc.Note that in the video TYOS 0.1.0 is used. Many, many new features have been added since then.HardwareThe TyTelli is made up of a few basic components:The...

  • Camping Stereo
  • Details     from Camping Stereo
  • I wanted to make a portable outdoor sound system that actually sounded good, and could be heard.I didn’t think this was much of a hack, I am just connecting off the shelf stuff, but a friend said I should send it to hack-a-day. I go camping(if you can...

  • MakerNet
  • Details     from MakerNet
  • Makernet simplifies electronics projects and makes low-level hardware act more modular and abstracted like software. I want to enable makers -- especially young makers -- to build cool projects with minimal effort.See the concept video below:Everyone...

  • WiFiGeiger
  • Details     from WiFiGeiger
  • Well... It is not a secret that Geiger counters are one of my favorite subjects where it comes to creating electronic projects. Everything began nearly decade ago, when I built original EtherGeiger. Since then project had been revised number of times,...

  • hConsole Cyberdeck
  • Details     from hConsole Cyberdeck
  • This is the hConsole, a portable cyberdeck that you can build yourself, it is hold together using 6 M2 screws and brass inserts and it is powered by a Raspberry Pi 4 model B. This is the complete list of parts to make one yourself: 6xM2 8mm Screws6xM2...

  • Poor Man's “Laser” Cutter
  • Details     from Poor Man's “Laser” Cutter
  • Attention 2015 Hackaday Prize Judges: Please save yourself time, this entry has No video.Thank you so much for your time all your hard work to make this community awesome!Setbacks have stalled this project, but I will attempt to continue to try to burn...

  • Smart Lamp Notification
  • Details     from Smart Lamp Notification
  • A nice lamp that would look normal in any living room and be acceptable to my wife is important to me. So when I discussed this with my wife I was surprised when she began helping me choose the lamp. The first lamp I found is an Ikea Borbby Lantern and...

  • PC in a flight case
  • Details     from PC in a flight case
  • Construction started by removing all the foam from the flight case and stripping it back to the bare shell.A design consideration was to have everything in the case and be able to close and lock it for transport, so each item had to be carefully placed.The...

  • Audio VU Meters & Raspberry Pi
  • Details     from Audio VU Meters & Raspberry Pi
  • Story I started building a NAS from my old hard drives and got a Raspberry Pi as server. Then all the wires and everything was just laying around randomly and I thought that I should make a nice case for it. First, I wanted to reuse old hifi equipment...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday