1904 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

#T_H_S
Details from #T_H_S
VideoQuick demo video of the hardware in actionUpdate videoThe beginningAnother year another hackaday prize, (I hope this is going to be an annual affair). After entering last years contest with a project I just happen to be working on at the time I...

Python Powered Scientific Instrumentation tool
Details from Python Powered Scientific Instrumentation tool
Production version here : This project has been adapted for mass production, and packaged along with an SBC running the necessary software. The software has over 70 different experiments, and a custom experiment designer.Quarterfinal VideoProject logs!Non...

GPS Disciplined xCXO
Details from GPS Disciplined xCXO
My first cuts at the crazy clock calibrator were using TCXOs with two different firmware loads. One load would test the clocks, the other load would accept a GPS PPS signal and would display the oscillator's drift relative to GPS. I could then subtract...

sdramThingZero - 133MS/s 32-bit Logic Analyzer
Details from sdramThingZero - 133MS/s 32-bit Logic Analyzer
Turn your Raspberry Pi (or nearly any Single-board or even regular computer) into a 133MS/s 32-bit Logic Analyzer, or a 3-channel 10-bit 'scope, etc.!-----------This project and its "father" were blogged at Hackaday! http://hackaday.com/2016/03/15/sdram-logic-analyzer-uses-an-avr-and-a-dirty-trick/(Thanks...

One Kilobyte Operating System (OKOS)
Details from One Kilobyte Operating System (OKOS)
One Kilobyte Operating System (OKOS)Tiny OS for 1kB challenge.Blurring the line between embedded system and general purpose computer. Inspired by all those wizardly tricks that brought computing to the masses on limited hardware.OKOS is an operating...

MorseMode
Details from MorseMode
MorseMode is a hardware translator between (a subset of) ascii and international Morse code. It is mostly a "just for fun" project, but might have some limited practical application. A zipped copy of the current version of the project source code is...

Build Billy McCoy's AT-ST Walker
Details from Build Billy McCoy's AT-ST Walker
This is not my model. I came across this AT-ST Scout Walker by Billy McCoy on Thingiverse. As you can see, it's pretty cool, but Billy's building instructions did not work so well - he'd improved the design, updated the files, but left the build instructions...

5V Logic on a Z80 Retrocomputer
Details from 5V Logic on a Z80 Retrocomputer
I bought a bunch of Z80 parts on ebay for cheap ($10 plus shipping). The parts came on a PCB which had not yet been flow soldered. From the date codes of the parts it looks like it was stuffed sometime around 1999. All I had to do was straighten...

An OS and SW Tools For The SBC-85
Details from An OS and SW Tools For The SBC-85
When microcomputers first appeared there was, of course, precious little software available for them. If you wanted to use a microcomputer for some particular purpose you were probably going to have to write the software yourself. That was...

IRK! Infrared Remote USB Keyboard
Details from IRK! Infrared Remote USB Keyboard
This project is for reasonably advanced electronic nuts...but if you stick with it anyone can make it. Through Hole Technology (THT) versionIf you choose to build the Through Hole Technology (THT) version, then you will be making a Printed Circuit Board...

plotly + Arduino + ESP8266
Details from plotly + Arduino + ESP8266
For this project I'm using an Arduino Uno with a ESP8266. I'm reading an ADC pin/pin's voltage on the Uno and wirelessly sending the data to plotly's server for real-time visualization. Plotly is a free online browser based tool for visualizing data,...

K40 Motorized Z axis
Details from K40 Motorized Z axis
The final version is much more polished. Photos of it along with more details are below!Note* I started this project with an already modified K40. We cut down the exhaust intake to give us more room in the Y axis. If you want to use this design then...

DIY Arduino Based Label Dispenser Machine
Details from DIY Arduino Based Label Dispenser Machine
Hello friends this time I have made a arduino based label dispensing machine I have used stepper motor and IR sensor in this project. I also used a custom-made PCB in this project. This project is great learning for 3D printing, Mechanics, electronics...

Etch-A-Whiteboard
Details from Etch-A-Whiteboard
Etch-A-WhiteboardAutomated Precision Drawing for the Artistically ImpairedNate Foss and Alex HogansonAutomation and Robotics Research LabThomas Jefferson High School for Science and Technology2015-16Table of ContentsAbstract 3Introduction 4Literature...

2:3 Scale VT100 Terminal Reproduction
Details from 2:3 Scale VT100 Terminal Reproduction
What It Is and What It's Not (Updated) Since the DEC VT100 was the gold standard for serial terminals in the early years, that's what I will base my design on, and since it will be a driver for a 2:3 scale PDP-8I I'll scale my design accordingly....

|<
<
3
4
5
6
7
>
>|