1904 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Spacers for kids electric dirt bike
Details from Spacers for kids electric dirt bike
My friend got a kids ride-on dirt bike and it had a few problems. The spacers that go on the axle between the rim and forks were not in the package, the headlight's did not turn on and one of the hand guards was cracked. I started with the...

World Create Day @ Made Makerspace
Details from World Create Day @ Made Makerspace
Come join the frikis, artists, and makers at Made Makerspace for a hacktacular evening of fun! On Saturday April 22nd, from 16h to 22h you and your friends are invited into our space to help us tackle a problem with a creative solution. We'll work together...

Do or Donut SAO
Details from Do or Donut SAO
From the picture it looks almost done, but far from it! This was just a layout test. I need to redraw everything, make it smaller and find out the arrangement of the LEDs first. Some things have to be fixed in software, as the original layout for...

Smiling LED mask
Details from Smiling LED mask
The mask is controlled by Arduino Lilypad board with FlashForth system installed on it. FlashForth has prebuilt firmwares for Arduino boards with ATmega328P running at 16 MHz. In the LilyPad board ATmega runs at 8 MHz. I tried to build FlashForth...

Anycubic Wash And Cure 2.0 Silent Mod
Details from Anycubic Wash And Cure 2.0 Silent Mod
The process involves removing the A4988 IC from the board (either by severing the connection closest to the chip or using hot air to lift the chip off) and then tapping off of the logical voltage connections on the board (refer to the picture below)...

Battery Powered Oil Lantern ATTiny/RGB LEDRetrofit
Details from Battery Powered Oil Lantern ATTiny/RGB LEDRetrofit
I decided I wanted to have a simple switch for power, and push button to cycle between modes. I also wanted it to be battery powered. I didn't want to use an entire Arduino for this project, so I grabbed an ATtiny85 - which looked like it would suite...

FPGA eink controller
Details from FPGA eink controller
Essential scrap website provide information about power driving of theses screen, but I was more interested in the signal driving, so I choose to use the TI TPS65185 IC http://www.ti.com/product/TPS65185 which manage everything (special thanks to @Arthur...

Simple 16-bit Computer
Details from Simple 16-bit Computer
This has been an ongoing project for over a year before being added here, so in addition to the overall design here, I will merge everything done so far into a the first log rather than trying to separate everything as it happened. Several years ago,...

Θ-65P : 6502 powered Watch
Details from Θ-65P : 6502 powered Watch
Hardware The watch is pretty standard as far as 6502 hardware goes: 65c02 running @ 8MHz65c22 (controls LCD, keyboard, and buttons)Nokia 5110 LCD (84x48)32k SRAM16k ROMC64 Keyboard Connector Probably the strangest bit there is the full size C64 keyboard...

Personal Illumination Device
Details from Personal Illumination Device
Power I 'upcycled' a portable battery bank that you can buy almost anywhere for just a few dollars. These little banks almost always have the same kind of standard Li-Ion 3.7 volt batteries inside. They are reliable and easy to work with (Li-Poly battery...

Wireless Doorbell Using Arduino and RF Module
Details from Wireless Doorbell Using Arduino and RF Module
Step 1: Things You Need For Transmitter 434 MHz RF Transmitter ModuleHT - 12E Encoder IC750 KΩ ResistorPush ButtonPower SupplyConnecting WiresPrototyping Board (Breadboard) For Receiver Arduino UNO434 MHz RF Receiver ModuleHT - 12D Decoder IC33...

Erzielboard
Details from Erzielboard
The 48hr Make It Challenge(Read the rules for the challenge here: THE RULES!This project is a combination development kit/breadboard. If you have a feature you would like to see, let us know in a comment and we'll see if we can work it in :D. It will...

8-bit in style: the PIC18 computer
Details from 8-bit in style: the PIC18 computer
During the development I had to make several difficult decisions: 1. The platform I had a number of contenders initially for the choice. Quickly dismissed all the “old-school” such as the ones from Zilog, Motorola, Intel, as well my favourite...

Fetch: A Ferrofluid Display
Details from Fetch: A Ferrofluid Display
Background We are a group of students at the University of Oslo, that have designed and built a massive ferrofluid-display with 252 electromagnetic "pixels". The display has a 12x21 resolution (the closest we could get to 16:9 on our budget), and is...

UNMOMENT - Ntp, Binary, Rgb CLOCK
Details from UNMOMENT - Ntp, Binary, Rgb CLOCK
This is a clock that is perhaps only a decorative object after all.It is possible to read the time by deactivating the seconds display. You can do this for 60 seconds by pressing one of the buttons.Then it is still difficult, because you have to...

1
2
3
4
5
>
>|