Close

1904 Results for "㈎ 뉴원더풀포커 ㉦ rgg799.top ㄽ 게이밍 노트 북 ㆊ 윌리엄힐사이트 ㉬ 온라인포커룸 ㅙ 고스돕홈페이지 ㄿ 리얼머니바둑이 ㆀ 빅뱅게임 ㉮ 백두산맞고"

  • tinyClock

  • Display: Top Digit shows hours, bottom-right is 1, left is 2, top-right is 4 and left is 8, lastly middle segment is 16. Middle Digit shows minutes, same as hours, with difference that instead of the middle part showing 16, I assigned the middle-right...
  • TTL Operation Module (TOM-1)

  • TOM-1 is a TTL-based processor with a small instruction set. The idea came from reading about projects like Gigatron and Ben Eater's 8-bit video series, as well as Verilog CPU implementations like nybbleForth. The design goal is to minimize chip count...
  • Old school IC tester

  • For now assume that all tested ICs are having GND at the left-bottom pin (I know it is not always true, but we may add support of other classes of chips later), all ICs will be installed to the bottom of ZIF-socket and we may have DIP14, DIP16, DIP20,...
  • Aeropress plunger leak fix

  • The first concept was to 3d print a threaded sleeve to glue to the outside of the top of the barrel, with a matching cap equipped with a tank valve (design pictured).  This was rejected for the following reasons: 1. The temperature resistance of...
  • Arduino Oled Picture Frame

  • To setup the SD: Format the card with FAT32. Create image file using MS Paint or another program, image size 64 pixels high by 96 pixels wide. Name the files "1.bmp", "2.bmp", etc. Save the files as 24 bits bmp. Convert bitmap to 16 bit BMP file, 5:6:5...
  • Snapchat spectacles

  • * Uses protobuf with a 4 byte prefix header that encodes a 'type' and length. For length, mask the top nibble. For type, mast all but the top nibble. 0 = unencrypted, 2 = encryption setup, 1 = encrypted. * ECDH is used to share public keys and produce...
  • Dippy

  • The description below is now outdated, but if you like it read where I'm at now at https://tonyrobinson.com/dippy Q: What do you mean by Acoustic Tubes? A: 40kHz ultrasonic transducers at each end of a 50cm to 1m plastic tube (air filled). The transmitter...
  • DIY a LED Christmas Tree

  • ➢Step descriptions: ✦Step 1:-Let's start soldering. We solder the SMD resistors first. They are really too small. ✦Step 2:-Then we solder interface of the TransFLash , there are a lot of pins, so we apply tin on the solder joint first. ✦Step 3:-OK,...
  • 6 Channel Temperature Meter

  • #include #include #include #include #define SCREEN_WIDTH 128 // OLED display width, in pixels #define SCREEN_HEIGHT 64 // OLED display height, in pixels #define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin) #define SCREEN_ADDRESS...
  • Control-O-Matic

  • This project is continuing to evolve over time. Current and planned features include over 50 leds, 40 switches, 2 missile launch switches, 2 key switches, 2 sliders, large 4 digit number display, 4x20 character display, 2 analog meter indicators, 2 rotary...
  • Ballbot

  • Parts:50mm 18 ring omniwheelsMaxon DCX22s motors with 16:1 gearbox and ENX16 EncodersLaser cut acrylic and 3D printed partsMPU-9250Teensy 3.xMiscellaneous components (switches, v-regs etc.)TI LMD18200 motor controllersHM-11 bluetooth? (currently not...
  • PiCTDCL

  • PiCTDCL records 1640x922 video at 30fps with an overlay at top of date, time, temp, depth, salt, and specific gravity. I control Pi with my phone using VNC to start and stop python program.Current version has:    Raspberry Pi Zero W  ...