Close

88 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워Ｆ グpossibility쓰리아워┃쓰리아워가격쓰리아워레깅스룸Ｉシ쓰리아워레깅스룸unnatural 쓰리아워ы쓰리아워레깅스룸㏅㈇temper"

  • AIMOS
  • Details     from AIMOS
  • These are parts of AIME's operating system that I am beginning to shoe-horn into a Raspberry Pi or more probably a few Zero's networked together inside a smaller and less sophisticated quadruped. AIME was 3.2GHz dual-core intel powered and a lot more...

  • HC-SR04 I2C Octopus "octosonar"
  • Details     from HC-SR04 I2C Octopus "octosonar"
  • There are not enough pins on a basic Arduino to provide 2 pins each to 8 HC-SR04 units. I2C bus would be the answer, but the bus itself is not fast enough for accurate echo measurement, and the only reference to an I2C library for these in the playground...

  • Analog Style LED Clock
  • Details     from Analog Style LED Clock
  • The clock was originally designed as my Senior Project to complete my Electrical Engineering Degree. A number of years ago, I remember reading about a technique to individually control a large number of LEDs with a relatively small number of I/O lines....

  • Breadboard VGA from TTL and SRAM
  • Details     from Breadboard VGA from TTL and SRAM
  • This is a follow-up of my "Breadboard VGA from EEPROM" project that was covered here [hackaday.com] two weeks ago.The video shows the new circuit's first signs of life. It is not really stable yet, but definitely getting somewhere. Halfway the build...

  • Double Action Keyboard
  • Details     from Double Action Keyboard
  • What is a double action keyboard? A double action keyboard has double action switches that have two independent functions that can be triggered without pressing any modifier keys. The first action can be accessed by pressing the switch one step down,...

  • MappyDot
  • Details     from MappyDot
  • The MappyDot is part of a planned suite of enhanced sensor breakouts that offer additional measurement filtering, an easy to use I2C interface, crosstalk reduction and an automatic bus addressing scheme. This helps you integrate the sensor easily compared...

  • DIY PWM Driver
  • Details     from DIY PWM Driver
  • In this Project, I will show you how to make PWM Controller. I'm using the laminator for the toner transfer method. What things you will need: Copper - clad board (Dual Layer) Ferric Chloride (FeCl3) Acetone (Nail polish remover) Glossy Paper LASER...

  • Jasper's Electronic Load R2
  • Details     from Jasper's Electronic Load R2
  • Arduino compatible Electronic Load 19V/5A/15W This the second revision of my electronic load. It is intended for testing DC power supplies, solar panels and battery capacity. It is special because the hardware and software is open source, it is Arduino...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday