Close

9540 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격ㅱ ╈proprietary8셔츠룸후기셔츠룸추천ヰamidst 선릉셔츠룸셔츠룸추천 셔츠룸추천※셔츠룸추천ㄴhandle㏉"

  • Hakkedpad

  • The launchpad is an array of 80 buttons, and 160 LEDs, two per key. It's not touch sensitive, but all the same ... There are five 74HC164, and three 74HC165 inside. 164s (serial to parallel) drive the LEDs, and 165s read the state of the keys. The matrix...
  • GLOROLL

  • 2015 : 1 x GloRoll. A 8' diameter steel and LED lit sphere that you can climb into. Think "atlas spheres" from American Gladiators, or if you don't want to youtube it, a metal -human sized- hamster ball.Now, not just a few glow bits, 1024 RGB Leds (yes,...
  • Projector Screen

  • It's quiet and fast.It will take 10-40 hours of your life.Your toddler or his friends drawing on it won't ruin your day. This revision has worked flawlessly, with no further adjustment and with daily use, for almost 2 years now.EDIT: 3 houses and almost...
  • hackcase

  • case is made from plywood found on the streets. there is some 5mm acrylic too, those i was buying cheap a4 size on ebay. wooden frame is held without glue, mostly little 3mm screws. board are mounted on 5x5cm, 10x10cm, 15x10cm wooden pieces,...
  • Install NetBSD on a PogoPlug

  • This HOW-TO will help you easily set up a PogoPlug to run NetBSD without needing to disassemble the device and solder on a serial adapter. When you're done, your PogoPlug will still be able to be booted into GNU/Linux but will automatically boot into...
  • Midi Foot Pedals

  • An original xbox controller has 8 channels of low-res analog, 4 channels of hi-res analog, and 8 channels of digital inputs.I tied the low-res channels to my front row of pedals.  Soldered a wire to a bit of pcb, ran the wire through the resistive...
  • One Bad A$$ Power Inverter

  • After looking over the schematic of a reverse engineered power inverter I thought to myself "Self this is not that complicated". So I set about making my own BAD A$$ POWER INVERTER. My Goals are as follows.1.  Pretty Easy to build with normal...
  • AquaGrow

  • They say you only need to put your AquaFarm in a sunny window shade, and that may work in Southern California, but here in New England, you can't grow much without a decent grow light.  Most grow lights available are 1) Bulky 2) Ugly 3) Expensive...