Close

4444 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

  • OCXO Sensitivity Measurement
  • Details     from OCXO Sensitivity Measurement
  • For my GPSDO project I’ve opted for a Piezo 2940210 VCOCXO at 10 Mhz. There is a dearth of information on this particular module available online.(A notation notation: I utilize “E” notation to indicate orders of magnitude; thus 1.5E-6...

  • Anatomy of a Claw
  • Details     from Anatomy of a Claw
  • To make the claw open and close, a 24V solenoid is used to pull the plunger into the cavity and close the claw via the linkage.  There is a return spring that allows for the plunger to be pushed out and open up the claws.  this was added as...

  • A Watch
  • Details     from A Watch
  • The watch uses the low power MSP430G2211 MCU from Texas instruments to control the LED and mesure the time with the help of a 32kHz watch cristal. The MCU sleeps most of the time only waking up ones a second to count up the time and check if the tilt...

  • 50Watt Led portable
  • Details     from 50Watt Led portable
  • The flood light have several main components:1) Led2) Led cooling3) Led driver4) lithium battery5) aluminium  housingThe description1) LedIf i started 6 years ago with the project a 50W led was not know in our region and costs up to 100usd. Today...

  • DSP on 8-bit microcontroller
  • Details     from DSP on 8-bit microcontroller
  • One of the most demanding applications for fast arithmetic is digital flitering. Atmel application note AVR201 shows how to use the hardware multiplier to make a multiply-and-accumulate operation (MAC). The MAC is the basis for computing the sum of terms...

  • Student AVR board
  • Details     from Student AVR board
  • This page describes a prototype board for the Atmel Mega644 or Mega32 (PDIP) MCU. It includes a power supply, crystal clock, and generous bypass capacitors. A six-pin header allows flash memory programming from an STK500 or AVRISPmkII. All port pins...

  • 100w LED projector conversion
  • Details     from 100w LED projector conversion
  • This project started some months back. I was given two projectors, one with a bulb, one without. Not wanting to scrap either unit, equally not wanting to spend £100 on a bulb that would be prone to shock and likely to fail, I decided a more serious...

  • Hakkedpad
  • Details     from Hakkedpad
  • The launchpad is an array of 80 buttons, and 160 LEDs, two per key. It's not touch sensitive, but all the same ... There are five 74HC164, and three 74HC165 inside. 164s (serial to parallel) drive the LEDs, and 165s read the state of the keys. The matrix...

  • Midi Foot Pedals
  • Details     from Midi Foot Pedals
  • An original xbox controller has 8 channels of low-res analog, 4 channels of hi-res analog, and 8 channels of digital inputs.I tied the low-res channels to my front row of pedals.  Soldered a wire to a bit of pcb, ran the wire through the resistive...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday