DNS-320L NAS Table of Contents 1. Intro2. Hardware 2.0.1. Weltrend WT69P32.0.2. JP2 connector 3. Bootloader4. Original firmware5. Building mainline Linux kernel6. Building a rootfs7. Bootloader setup8. References 1 Intro The D-Link DNS-320L is a simple...
Links to project details (GIT, Wiki, Docs) are on the left. The laziest intro to this project is the 2-minuite video created for THP Quarterfinals (i.e. the first video I made):Or even better, see my full 5-min final video (there is also the semifinal...
COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...
Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...
STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) ) I have still continued the STM32 build...
Details, details ,details..... It's alive. (The electronics/coding is actually the easy part...) The real challenge is those semi-translucent tubes... Found some cheap transparent tubes at Home Depot used for storing flourescent light-bulbs. 1 1/2 "...
GoalsThe goal of this project is to emulate the Canon 600EX-RT Speedlite (via it's IEEE 802.15.4 protocol) and interpret the commands from Canon transceiver so that the Paul C Buff - Einstein light can be controlled with the Canon gear.CyberSync CSXCV...
Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...
ideally, this sticks to a window, and measures noise levels through a piezo (contact mic). the other piezo is set up to knock. the rgb is for output. on this prototype, you can use the red LED for visual indicator.detail pictures show the traces running...
Two weeks ago, I set off to a business trip to Germany, which is also my home country. I always try to have a few days of vacation included in such a trip in order to be able to visit my family. And what does a father with his son living in another country...
I've wanted to build my own amp for quite a while. For bass guitar, the selection of amplifiers you can buy is pretty lack-luster, and mid-volume studio amps are hard to find. It seems like most of what's available is either a practice amp or a stadium...
I picked up the vacuum system from Portland State two weeks ago from a professor I know. It was too big for the little things they do and by the time it warms up and pumps down there is no time left. So they decided to get rid of this system and build...
In the original configuration, the airswimmer is propelled by the tail fin, which can be flapped left-to-right using the remote. The whole fish can also be tilted up or down by moving the gondola, which holds the battery and receiver, forward and back...
IntroductionVaporization is done by off-the-shelf ultrasonic atomizers, either really cheap ones (the black ones in the picture below, 2.50 $ each) or some more rigid ones (the silver one, a Fogstar 300, 290 € each), air is moved by an array of...
I've been busy with other projects, summer and the day job, but here's an update on the Pinstax. After weeks of perking this project through my brain, I enjoyed some frenzied productivity as ideas came to 3D printed reality. One of the problems...