Close

13208 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남셔츠룸っ 셔츠룸가격conspicuous셔츠룸후기선릉셔츠룸셔츠룸solid 셔츠룸가격│Æ셔츠룸후기derivative"

  • USB DAC with amplifier
  • Details     from USB DAC with amplifier
  • USB InterfaceThe USB interface is all done by the PCM2705 IC. When the DAC is connected to a computer it recognizes it as a USB sound card and no manual installation of drivers is need. The DAC can control playback on the computer with the following...

  • Hakkedpad
  • Details     from Hakkedpad
  • The launchpad is an array of 80 buttons, and 160 LEDs, two per key. It's not touch sensitive, but all the same ... There are five 74HC164, and three 74HC165 inside. 164s (serial to parallel) drive the LEDs, and 165s read the state of the keys. The matrix...

  • GLOROLL
  • Details     from GLOROLL
  • 2015 : 1 x GloRoll. A 8' diameter steel and LED lit sphere that you can climb into. Think "atlas spheres" from American Gladiators, or if you don't want to youtube it, a metal -human sized- hamster ball.Now, not just a few glow bits, 1024 RGB Leds (yes,...

  • Autonomous Pi bot
  • Details     from Autonomous Pi bot
  • Basic Localisation and routing is implemented as can be seen above in the video.Speed control - the speed of each track is regulated by a PID using feedback from the quadrature encoders.Directional control - a PID monitoring the heading as determined...

  • Projector Screen
  • Details     from Projector Screen
  • It's quiet and fast.It will take 10-40 hours of your life.Your toddler or his friends drawing on it won't ruin your day. This revision has worked flawlessly, with no further adjustment and with daily use, for almost 2 years now.EDIT: 3 houses and almost...

  • hackcase
  • Details     from hackcase
  • case is made from plywood found on the streets. there is some 5mm acrylic too, those i was buying cheap a4 size on ebay. wooden frame is held without glue, mostly little 3mm screws. board are mounted on 5x5cm, 10x10cm, 15x10cm wooden pieces,...

  • Install NetBSD on a PogoPlug
  • Details     from Install NetBSD on a PogoPlug
  • This HOW-TO will help you easily set up a PogoPlug to run NetBSD without needing to disassemble the device and solder on a serial adapter. When you're done, your PogoPlug will still be able to be booted into GNU/Linux but will automatically boot into...

  • One Bad A$$ Power Inverter
  • Details     from One Bad A$$ Power Inverter
  • After looking over the schematic of a reverse engineered power inverter I thought to myself "Self this is not that complicated". So I set about making my own BAD A$$ POWER INVERTER. My Goals are as follows.1.  Pretty Easy to build with normal...

  • Rotating Dry Duck Pond
  • Details     from Rotating Dry Duck Pond
  • The project got off to a start when a teachers husband wanted a rotating table for a little duck pond to be used in the schools carnival.In a scurry I ran to the shop and started digging through the miscellaneous parts I have accumulated over the years....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday