Close

550 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • 3D-printable linear actuator
  • Details     from 3D-printable linear actuator
  • This linear actuator is almost completely 3D printed (except for the thread and some bolts, nuts and bearings).I currently don't have any position feedback or limited switches installed on it, I will add them in the feature when I'm going to integrate...

  • Egor V.2 Robo-Animatronic
  • Details     from Egor V.2 Robo-Animatronic
  • Full Description:The title of my final year Multimedia Design project (Actuality and Artificiality) is an adaptation of the post-modernist philosopher Jean Baudrillard’s ideology, Simulacra and Simulation: Simulacra as object and Simulation as process....

  • The Spice Must Flow Sand Table
  • Details     from The Spice Must Flow Sand Table
  • This started out as a cable driven mechanism, but I converted it to belt drive when I found cables to be a bit too troublesome.  It's a single level corexy mechanism with 3D printed motor mounts, pulley blocks, and Y axis bearing blocks.  The...

  • Mantis Microscope Repair
  • Details     from Mantis Microscope Repair
  • I modeled up a new mounting bracket based on the remains of the original bracket (in the photo above) and a few assumptions along with plenty of measurements. The bracket was 3D printed using my Tronxy P802M printer using white PLA with a layer height...

  • Hourglass Clock
  • Details     from Hourglass Clock
  • When I finished the clock I put together a quick video describing the clock. There wasn't any video to speak of that was taken during construction though there were a bunch of pictures. This details section walks through many of the steps that were taken...

  • Ghostbusters PKE Meter
  • Details     from Ghostbusters PKE Meter
  • There was one cartoon in particular that seems to dominate my childhood memories and that was The Real Ghostbusters. Ray, Winston, Peter and Egon were armed to the teeth with really cool gadgets, among them the PKE meter. This was my favourite of all...

  • Year Clock
  • Details     from Year Clock
  • I don't have much experience with mechanics, so I had to apply the simplest way to have the clock hand, which is 9.12" long, stable enough and free from nodding (by the way, the hand is made of the longest sewing needle that I could find). Three...

  • Zoom backdrop on casters
  • Details     from Zoom backdrop on casters
  • To make the 6’ verticals, a 2’ segment was bolted to a 4’ segment with two bolts, with a hand-width of overlap. The pine board was cut in half to provide two wheel carriages each 18” long, and the outer corners of each were cut off and filed....

  • Electrowalt (ERG14)
  • Details     from Electrowalt (ERG14)
  • I was tired with awful lifespan of these Electrolux cordless vacuums and wasn't ready to buy my 3rd unit and ignoring the fact that after 2 years I'd be in the same spot again. What pisses me even more is that the electronics in these things are...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday