The idea is quite simple: Stick some resistive wire under the build plate and tap into the 19V power supply of the Cetus to heat it up. I started by drawing some guide lines on the under side of the Cetus' build plate: I then covered everything except...
I wanted to make a portable outdoor sound system that actually sounded good, and could be heard.I didn’t think this was much of a hack, I am just connecting off the shelf stuff, but a friend said I should send it to hack-a-day. I go camping(if you can...
When I originally designed the printed parts for my RosBot the Vertex's were made to only have one 15/15mm vertical extrusion per corner. Once I started building and had the frame together I noticed there was a lot of twist and wobbliness and not much...
A Bit Pushy is Pantri's first device! It's a cool little button that works with the Pantri API. Why would you want to have one? You'll end up with a swanky button that you can press to connect to the Pantri service where you track & re-order grocery...
I've been a fan of Apple's hardware since the early 2000's when they first introduced OS X. I had enough of Windows, its inferior architecture, and poor stability. OS X was stable, fast, and under the hood was Unix. The PowerBooks were...
Hackaday.io is all (mostly?) about sharing projects, so a key aspect should be how to create a project. I've made a couple but only rarely, so i forget the process. Looking around, about the only HELP available is this thing called Everything...
The process involves removing the A4988 IC from the board (either by severing the connection closest to the chip or using hot air to lift the chip off) and then tapping off of the logical voltage connections on the board (refer to the picture below)...
Goals/plan:1. Find and purchase main components as cheap as possible.2. Hook a single display module up to a CPU on a breadboard.3. Get the display to display something.4. Write low-level library for addressing display.5. Hook up two more displays and...
It's separated in modules. You press the upper button (A) to switch between them, and when you reach the desired number you press the lower button (B). Nothing (0) -> Torch (1) -> Laser (2) -> IR Mode (3) -> TV-B-Gone (4) -> Only sound (5) Our...
LicenseAll images and linked files are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.ConstructionCube You can download all parts of the cube ( .dxf ) and a 3D modell ( .step ): herethe endings of the...
This clock will tell you everything you need while you’re in bed. It tells you the time and date of course, but it can also tell you the temperature outside the bed, or the weather forecast. During the day it can function as an atheistic piece, showing...
This started simple enough, I wanted lights in the skull eyes! Which quickly (as I was soldering it) thought about how it's going to be safer too which then led to the dead man's switch idea from having to wear a bracelet (my mom has one too) so if I'm...
We saw the need for something like this after our experiences in college. A fellow classmate was raped and murdered in a park right by our house in broad daylight. It changed everything for the worst on campus and trust was at an all time low between...
Step 1. Open the Radio and remove everything inside, except for the speakers. Step 2 Grind off all the excess mouldings off the face plate to allow a flush mounted fascia Step 3 Cut Laminex sheet to fit the fascia space and cut in the extra holes required...
Cells are individual units that get power (+12V and +5V) via a bus. They are a standard size (9"x9"x3"). They have a standard electronics unit that provides for up to 2 DC motors, 2 Servos, 4 limit switches, and 1 switched output. All cells also have...